fixfix
RCSearch
  • Submit registration
  • Login
Tell your friends about this site!
Publish on twitter.com
Recommend this site to Google users
На русском
Hobbyking
Join to our channels: new products, coupons, best deals:
RC FPV in winter
Multirotors
FPV
Helicopters
Remote Controllers
Airplanes, aircrafts, flying wings
Battery Chargers
Batteries
Robots
Electronics
Boats
RC Cars
Brands
Fasteners
Fun Club & Merch
DJI
Backpacks & Cases
Workbench
Arduino World

DeHavilland Vampire 90mm EDF Composite 1410mm (ARF) (AR Warehouse)

DeHavilland Vampire 90mm EDF Composite 1410mm (ARF) (AR Warehouse)
SKU: 108000013-0

3496 g

Description

The de Havilland DH.100 Vampire was a British jet fighter commissioned by the Royal Air Force during the Second World War. Following the Gloster Meteor, it was the second jet fighter to enter service with the RAF. Although it arrived too late to see combat during the war, the Vampire served with front line RAF squadrons until 1953 and continued in use as a trainer until 1966. The Vampire also served with many air forces worldwide, setting aviation firsts and records. Almost 3,300 Vampires were built, a quarter of them under license in other countries. The Vampire design was also developed into the de Havilland Venom fighter-bomber as well as naval Sea Vampire variants.

Our DH Vampire comes almost ready to fly and is designed around a 90mm EDF unit powered by a 6~10S Lipoly battery. It is perfect for a pilot looking for something different. The model comes with fixed gear but is retract ready.  The airframe of the Vampire is molded fiberglass composite for the fuselage/tailbooms with the wings and horizontal tail being of built up balsa and plywood. All wooden surfaces come pre-covered in plastic film.

Since this is a almost ready to fly model, all you need to do is complete the final assembly, install your components, and fly. All the difficult building and painting has been done for you. A few evenings of work is all that is needed to get the Vampire ready for its first sortie.

Features:
• Almost Ready to Fly - Just complete final assembly and install your own equipment
• Fiberglass composite molded fuselage
• Pre-covered balsa/plywood wings and horizontal tail
• Complete hardware package
• Fixed landing gear included, but retract ready
• Large fuselage top hatch for easy battery access

Specs:
Wingspan: 1410mm
Length: 1135mm
Flying Weight: 3600g

Requires:
7 Channel Transmitter and Receiver
90mm EDF with Motor
6S~10S  22.2~37V 4000~5000mAh Lipoly Battery 35C+
12 x metal gear 12g servos
100A High Voltage ESC (Depending on final setup)


Combo items

The following items can be purchased with a combo-price, if you put them in the cart with DeHavilland Vampire 90mm EDF Composite 1410mm (ARF) (AR Warehouse). Attention: these products may have more beneficial buddy-price or promo-price.
ZIPPY Compact 4000mAh 6s 60c Lipo Pack (AR Warehouse)
SKU: 9067000052-0
ZIPPY Compact 4000mAh 6s 60c Lipo Pack (AR Warehouse)

916 g

HobbyKing™ HK-922MG Digital MG Servo 1.8kg / 0.07sec / 12g (AR Warehouse)
SKU: HK-D922MG
HobbyKing™ HK-922MG Digital MG Servo 1.8kg / 0.07sec / 12g (AR Warehouse)

35 g

HobbyKing Super Glue CA (50g / 1.7oz) Medium (AR Warehouse)
SKU: HC-50-175C
HobbyKing Super Glue CA (50g / 1.7oz) Medium (AR Warehouse)

89 g

Insta-Cure Super Thin CA Glue 1/2 oz (AR Warehouse)
SKU: HK-101
Insta-Cure Super Thin CA Glue 1/2 oz (AR Warehouse)

28 g

Turnigy™ XGD-11MB Mini DS Servo 2.2kg / 0.12sec / 11g (AR Warehouse)
SKU: 9378000004
Turnigy™ XGD-11MB Mini DS Servo 2.2kg / 0.12sec / 11g (AR Warehouse)

23 g

Insta-Cure IC-Gel .7 oz (AR Warehouse)
SKU: HK-116
Insta-Cure IC-Gel .7 oz (AR Warehouse)

45 g

Quick-Cure 5 Min Epoxy Glue 9. oz (AR Warehouse)
SKU: HK-202
Quick-Cure 5 Min Epoxy Glue 9. oz (AR Warehouse)

359 g

Turnigy dlux 120A HV Brushless Speed Controller (OPTO) (AR Warehouse)
SKU: TGY_DEL120HV
Turnigy dlux 120A HV Brushless Speed Controller (OPTO) (AR Warehouse)

165 g

Hextronik MG-14 14g/2.6kg/0.11sec Digital Aircraft Servo (AR Warehouse)
SKU: MG14
Hextronik MG-14 14g/2.6kg/0.11sec Digital Aircraft Servo (AR Warehouse)

25 g

Mid-Cure 15 Min Epoxy Glue 4.5 oz (AR Warehouse)
SKU: HK-203
Mid-Cure 15 Min Epoxy Glue 4.5 oz (AR Warehouse)

203 g

Slow-Cure 30 Min Epoxy Glue 4.5 oz (AR Warehouse)
SKU: HK-205
Slow-Cure 30 Min Epoxy Glue 4.5 oz (AR Warehouse)

197 g

OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver (AR Warehouse)
SKU: ORNG8F
OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver (AR Warehouse)

39 g

Join to our channels: new products, coupons, best deals:
Copyright © 2011—2025 | RCSearch.info | Manych project
↑