Durafly™ T-28 Trojan 1100mm (PNF) w/40A ESC (AR Warehouse)

This superb looking T-28 from our top quality Durafly® ™ range and has enough scale detail and features to keep any warbird enthusiast happy. The 1100mm range offers the RC pilot a practical size model that can be easily transported and uses the ever popular 2200mAh 3s Lipoly pack, yet at the same time, the model is large enough to have presence and is able to tackle most airfields, not to mention a little wind, making it very practical.

As well as looking fantastic, this Trojan is plug and fly, meaning very little assembly work is needed. The powerful outrunner motor, 40A ESC, navigation lights, servoless electric retracts, gear doors & servos are all pre-installed leaving you to glue on the tailfeathers and some scale detailing, bolt on the plug in wings and go flying!

We have flown this superb T-28 Trojan extensively during testing and it will not disappoint, there is plenty of power for those really scale warbird aerobatics and the airframe is viceless with no hint of a tip stall. The pre-installed flap servos have a nice, slow operation to help prevent ballooning and the flaps themselves allow the approach speed to get down to a crawl without a hint of wingrock. There is no doubt, this is one fantastic looking warbird and it flies as easily as a low wing trainer!

 

For those looking for a bit more power and the ability to run on 4S battery the ESC has been upgraded to a 40A ESC in this model. You may need to cut a bit of foam and recheck your CofG to install this larger battery.

Specs:
Wingspan: 1100mm
Length: 910mm
Flying Weight: 1260g
Motor: 850kv Brushless Outrunner Motor
ESC: 40A w/BEC
Wing Area: 20.7dm2
Wing Loading: 60.8g/dm2

Includes:
Full photo manual
All hardware

Requires:
Your Own 6 Channel TX/RX
2200mAh 3s Lipoly Battery