Z-1 Pround 3-Axis Handheld Stabilizing Gimbal for GoPro

Description

The Z-1 Pround 3-axis handheld gimbal is a great looking, compact and above all, comfortable camera stabilizing unit for your GoPro action camera and is capable of giving outstanding results.
Its light weight, ergonomic design allows prolonged use without discomfort, while its compact dimensions let you pack it away almost anywhere when not in use.  

The Z-1 Pround has 3 different modes to give you ultimate freedom ; Locking Mode, Heading Following Mode, and Heading/Pitch Following Mode.

Locking Mode: Heading, Pitch and Roll are locked.

Heading Following Mode: Pitch and Roll are locked. Heading rotates, allowing you to follow the subject smoothly.

Heading and Pitch Following Mode: Roll is locked, Heading and Pitch rotate smoothly to follow the direction of the handheld.

The Z-1 range of gimbals is designed for use with the GoPro range of cameras, but may be used with similar cameras with modifications.

The Z-1 Pround is able to process motor and attitude data at up to 4 times faster than the original Z-One Pro, making it around 8 times faster than similar products providing unparallelled image stability. Integrated round motor magnets in the gimbal motors work with the 64mm motor shafts for ultra-smooth operation and the uprated 18650 LiPoly batteries allow in excess of 10 hours (yes, TEN hours!) operating time between charges.

Add a Z-1 handheld gimbal to your rig and say goodbye to blurry images and wobbly video!

Features:
• Built-in high precision gyro+accelerator dual CPU calculation
• Simple and easy to use, no need to adjust  parameters
• Auto smart position sense
• Smart motor power control
• Smart motor locked-rotor protection
• Camera charging while filming
• Hidden cables
• Suitable for Gopro 3, 3+ 4 and other similar size cameras

Specs:
Voltage: 6.8~12.6V
Current: 50mA~2A
Resolution: ±0.01°~±0.04° (no motion) ±0.1°~±0.5° (tracking)
Pitch range: +/-180°
Roll range: -45°~35°
Heading range: +/-150°
Heading working angle: +/-50°
Follow rate: 1~50°/Sec Pitch, 1~80°/Sec Heading
Operating temp: -20~45°
Operating time: >10hrs
Dimensions: 305 x 95 x 901mm
Weight: 280g (Without batteries & camera)

Included:
1 x 3-Axis Handheld Gimbal Camera Stabilizer
2 x Camera retaining brackets
2 x M2.5 x 10mm Hex Screws
2 x M2.5 x 20mm Hex Screws
1 x 2mm Hex Wrench
2 x 18650 LiPoly Batteries
1 x Charger
1 x USB Cable
1 x Warranty Card
1 x User's Manual