Delta Rocket High Speed Wing - Red 640mm (ARF)
Delta wings are fast, stable and they slow down for a landing. What more could you ask for?
The Delta Rocket is compact airframe built from balsa and ply arriving almost ready to fly, just needing final assembly and electronics installed to be ready to go. Covered in a printed plastic film, the eye-catching scheme is easy to orient in the air, quite important on a fast plane like this.
Assembling the Delta Rocket takes just a matter of a few hours. The elevons come pre-hinged, just cut slots in the covering for the vertical fins, glue them in place and the airframe assembly is complete. Lower sub-fins act as landing skids and help protect the belly of the airframe from runway rash. For power, the Delta Rocket works well on a 3S power system with at least 150 watts. Access the battery quickly through the magnetically secured canopy. The small and compact nature of the Delta Rocket makes it ideal as that leave it in the car airplane, ready and able to fly at a moments notice.
• Almost Ready to Fly - Complete final assembly and install electronics
• Light weight and simple balsa and plywood airframe
• Covered in pre-printed multicolor film
• Magnetically secured battery hatch
• Accepts power systems 150~200 watts
• Two color versions available
• Lower sub-fins protect the propeller on landing
3+ Channel Transmitter and Receiver
150~200 Watt Power System
3S 11.1V 1500~1800mAh LiPoly Battery
Combo itemsThe following items can be purchased with a combo-price, if you put them in the cart with Delta Rocket High Speed Wing - Red 640mm (ARF). Attention: these products may have more beneficial buddy-price or promo-price.
|ZIPPY Compact 1500mAh 3S 25C Lipo Pack|
|Turnigy nano-tech 1500mah 3S 25~50C Lipo Pack|
|ZIPPY Flightmax 1800mAh 3S1P 20C|
|Turnigy™ S3101S Servo 2.5kg / 0.14sec / 17g|
|Turnigy AE-25A Brushless ESC|
|HobbyKing™ HK15148 Analog Servo 2.5kg / 0.14sec / 17g|
|Turnigy 2627 Brushless Outrunner 3800kv|
|Insta-Cure Plus Gap Filling CA Glue 1. oz|