Turnigy nano-tech 330mah 2S 45~90C Lipo Pack for Align T-Rex 150 DFC (AU Warehouse)

Description

Designed specifically for the Align T-Rex 150 DFC helicopter, as a direct drop in upgrade pack.

With an additional 80mAh capacity and a higher discharge rate, (When compared to the original align pack), you'll experience unparralled throttle response, power when you need it and longer flight times. 

When tested with the T-Rex 150 DFC, the differences between the original battery and the nano-tech were obvious. Pitch pumps pack more punch and flight times were extended by more than one minute thanks to the pack's additional 80mAh capacity and higher discharge rate. 

Spec.
Capacity: 330mAh
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 45C Constant / 90C Burst
Weight: 18.6g 
Dimensions: 43.5x20x11.3mm
Discharge/Charge Plug: JST-XH 

Suited to the following models: Align T-Rex 150 DFC

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.