Dr. MadThrust 2.0" / 51mm Main Wheels with Electro Magnetic Braking System (2pc)

Description

The Dr. Mad Thrust Electrical Magnetic Brake System is the lastest accessory created specifically for EDF jet applications. The Dr. recognizes the need to slow a model down once the aircraft is on the ground. This simple system utilizes a electro-magnetic system built into the main landing gear wheel hubs.

Magnets set into the outer rim of the wheel react with the coil in the center hub. When a current is passed through the coil, the magnets react with the magnetic field generated and slow the wheel down, thus causing the aircraft to brake. As there are no friction parts in the wheels, they cannot wear out so reliability and longevity should never be an issue.
You can even use braking progressively to avoid locking up the wheels when applying the brakes. Just set them up on a progressive channel on the TX operated by a variable channel such as down elevator.

You get a pair of braking wheels and an Electro Magnetic Brake Controller. This plugs straight into your receiver for signal and draws power from an external battery pack, you can use anything from 3-10s LiPo.

Features:
• Simple to install
• Includes alloy wheels with rubber tires
• Brake hub pre-installed on 4mm axle
• Detailed installation instructions
• Perfect for many 90mm EDF scale jets

Specs:
Input: 12~40V
Output: 2A, 0~12V
Axle Size: 4mm
Wheel Size: 51mm
Control Board Size: 55x26x7mm
Control Board Weight: 15g
Wheel/Brake Weight: 140g