X-4 FPV Fiberglass Quadcopter Frame 485mm
Just when you thought that all multi-rotor frames looked the same...the X-4 FPV appeared on the scene and is breaking all the rules! Featuring fiberglass construction with ply reinforcement, the X-4 is super rigid yet lightweight. Its high gloss paint job is impressive to look at making it really stand out in the air.
This is the first purpose built fiberglass FPV multi-rotor frame on the market today and is very unique. It features a very large internal canopy space allowing for mounting of all your electronic components including your FPV system. It even provides mounting grooves for LED light strips on the bottom of the arms making it perfect to setup for night flying as well!
The unique fiberglass body design is beautifully finished and fully enclosed. It even includes top and bottom motor covers to hide all of the wires making for a super sleek and futuristic look.
The X-4 arrives mostly pre-built and with all necessary hardware. You will simply need to add your own radio system, brushless motors/ESCs, multi-rotor control board and lipoly battery.
• Unique full-body fiberglass construction
• Integrated clear canopy dome for FPV camera use
• Beautiful high gloss paint job
• Full body design makes for easy orientation while flying
• LED strip mounting grooves
Width: 485mm (motor shaft center to center between front/rear arms)
Frame weight: 730g (w/out electronics)
28-XX or 35-XX brushless outrunner motor x 4
25~40A brushless ESC x 4
10~12 inch propeller x 4 (2 standard/2 reverse rotation)
Multi-rotor control board
2200~3000mAh 3~4S lipoly battery
4CH transmitter and receiver
Combo itemsThe following items can be purchased with a combo-price, if you put them in the cart with X-4 FPV Fiberglass Quadcopter Frame 485mm. Attention: these products may have more beneficial buddy-price or promo-price.
|TURNIGY Plush 30amp Speed Controller w/BEC|
|NTM Prop Drive Series 28-30S 900kv / 270w (short shaft version)|
|NTM Prop Drive Series 28-30A 750kv / 140w|
|NTM Prop Drive 28-36 750KV / 265W|
|Turnigy nano-tech 2200mah 3S 35~70C Lipo Pack|
|GWS Style Slowfly Propeller 12x4.5 Black (CW) (4pcs)|
|Turnigy nano-tech 2200mah 4S 25~50C Lipo Pack|
|Turnigy Battery Strap 330mm|
|10x4.5 SF Props 2pc CW 2 pc CCW Rotation (Orange)|
|Turnigy nano-tech 2650mah 3S 25~50C Lipo Pack|
|Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack|
|HobbyKing Multi-Rotor Control Board V3.0 (Atmega328 PA)|
|Turnigy nano-tech 2650mah 3S 35~70C Lipo Pack|
|Turnigy nano-tech 2650mah 4S 35~70C Lipo Pack|
|NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version)|
|Single 4mm Male to 4 x 3.5mm Female Adapter (1 set)|