NGH GT9 9cc Gas Engine With Rcexl CDI Ignition

Description

This is the GT9 9cc (.52cu) Gas engine from NGH. Well suited to .40-.50 glow sized models, this engine offers light weight and fantastic power output for it's size - 0.8hp @ 15,000rpm.

This is a good quality gas engine and comes complete with the reliability of an Rcexl CDI ignition system. Full installation and run-in instructions are also included. The GT9 is not only a great little performer, it looks great too! Featuring a sand cast crank case, contrasting blue anodized head and prop driver.

This package is economical to run in comparison to similar sized glow engines. Get some gas engine economy for your model today!

NOTE: Do not run with less than the manufacturers recommended oil:fuel ratio!

Includes:
• GT9 engine
• Diaphragm fuel pump
• Muffler
• Spark plug
• Complete CDI ignition system
• Full instruction manual

Spec:
Engine type: Single cylinder, 2-stroke, air-cooled
Bore/Stroke: 23.35 x 21.2
Piston displacement: 9.07cc
Max. power: 0.8HP/15,000rpm
Min. idle Rpm: 2200-2600
Practical RPM: 2,600-15,500
Ignition: Rcexl CDI with auto advance
Spark plug: 1/4 x 32 Rcexl
Carburetor: NGH 2 needle 60G integral regulator (external pump included)
Ignition Power DC 4.8-6.0v (Lipoly via a Ubec)
Lubrication oil: 2 cycle Engine Oil API TC / JASO FD or better specs. (Mobil + M2T)
General use fuel: 20:1-25:1
Propellor range: 10x6 to 12x6

Dimensions/Weight:
Length backplate to propeller boss: 90.7mm
Stand off: 22mm
Mounting: 44mm x 18mm
Height from crank centreline to spark plug tip: 86.6mm
Weight: 545g (including ignition and muffler)

Engine type: Single cylinder, 2-stroke, air-cooled
Bore/Stroke: 23.35 x 21.2
Piston displacement: 9.07cc
Max. power: 0.8HP/15,000rpm
Min. idle Rpm: 2200-2600
Practical RPM: 2,600-15,500
Ignition: Rcexl CDI with auto advance
Spark Plug: 1/4 x 32 Rcexl
Carburetor: NGH 2 needle 60G integral regulator (external pump included)
Lubrication oil: 2 cycle Engine Oil API TC / JASO FD or better specs. (Mobil + M2T)
General use fuel: 20:1-25:1
Propellor range: 10x6 to 12x6
Length backplate to propeller boss: 90.7mm
Stand off: 22mm
Mounting: 44mm x 18mm
Height from crank centreline to spark plug tip: 86.6mm
Weight: 545g (including ignition and muffler)