CNC Drilling Jig Set 4SS (Drill 4.3mm) Gold

Description

CNC Drilling Jig Set 4SS (Drill 5.1mm) Gold

Suitable for the following Engine DLE30
Mounting: 4 Hole
hole circle: 26mm
weight: 105g

Drill : 4.3mm Includ

Material;
Jig(Gold): AL6061 (anodized)
Rotation prevention Pin(Blue): AL6061 (anodized)
Drill Holders: 7075 (Hard coating)

Prop drill jig for 4 bolt fixing comes with drill guide locking peg and drill bit.Hand held drill can be used as drill guide keeps drill straight no need for a pillar drill .

Instructions;
Step 1: insert jig into the hole to the propeller
Step 2: After inserting jig, drill the first hole using the silver drill guide
Step 3: Place rotation prevention pin (blue) into the drilled hole
Step 4: Drill the remainder of the holes using the drill guide.

Mounting: 4 Hole
Hole circle: 26mm
Weight: 105g
Drill: 4.3mm Includ
Jig(Gold): AL6061 (anodized)
Rotation prevention Pin(Blue): AL6061 (anodized)
Drill Holders: 7075 (Hard coating)
Step 1: insert jig into the hole to the propeller
Step 2: After inserting jig, drill the first hole using the silver drill guide
Step 3: Place rotation prevention pin (red) into the drilled hole
Step 4: Drill the remainder of the holes using the drill guide.