fixfix
RCSearch
  • Topics
  • Сoupons for Banggood
  • Submit registration
  • Login
Tell your friends about this site!
Publish on twitter.com
Recommend this site to Google users
На русском
Hobbyking
Join to our channels: new products, coupons, best deals:
RC FPV in winter
Multirotors
FPV
Helicopters
Airplanes, aircrafts, flying wings
Remote Controllers
Battery Chargers
Batteries
Robots
Electronics
RC Cars
Boats
Brands
Fasteners
Fun Club & Merch
DJI
Backpacks & Cases
Workbench
Arduino World

Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level) (US Warehouse)

Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level) (US Warehouse)
SKU: 421000013-0

166 g

Description

The Arkbird Autopilot System w/OSD is an all-in-one solution for your FPV model's navigation. This unit is loaded with features such as GPS waypoint flight, "Return to Home" functionality, auto-leveling, altitude hold and much more! It utilizes GPS, barometer and attitude sensors to stabilize/control your model's flight.

Worried about losing control of your FPV model when flying out of sight? With the Arkbird Autopilot System on-board there is no need to worry! The "Return to Home" function can be activated at any time to fly your model back to its take-off position and will be activated automatically in the event that your model flies out of RF range. Set a "fence area" so you don't fly outside defined boundaries.

The integrated OSD system provides you with all of the information you need during flight such as altitude, flying direction, home direction, roll angle, pitch angle and time since take-off just to name a few. This system also includes a current sensor with pre-installed XT60 power plugs so you can monitor your model's flight battery status via the OSD.

The Arkbird Autopilot System comes with everything you need to setup your FPV model for the ultimate in GPS based Autopilot flight. It features a "plug and play" design meaning there is no soldering or modification required to use. All power plugs and wire connections are pre-installed. 

Features:
• GPS, barometer and attitude sensors to stabilize/control your model's flight
• Integrated OSD functionality
• GPS based "Return to Home" functionality
• 4 point GPS waypoint flight
• "Cruise Flight" mode offering straight and level flight pattern holding
• Auto-leveling
• Set "fence area"
• Easy to setup and adjust

*Note:
 See user manual located under the "Files" tab below for full features/specification for this system.

Specs:
Arkbird Autopilot controller
Dimensions: 50x40x18mm
Weight: 30g

Gstar R-15E GPS module
Dimensions: 44x34x12mm 
Weight: 21g 

Includes:
Arkbird Autopilot System w/OSD
GPS module
Current sensor
All necessary connection cables


Price History

Combo items

The following items can be purchased with a combo-price, if you put them in the cart with Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level) (US Warehouse). Attention: these products may have more beneficial buddy-price or promo-price.
Fatshark Dominator V3 Headset (US Warehouse)
SKU: 253000070-0
Fatshark Dominator V3 Headset (US Warehouse)

840 g

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g (US Warehouse)
SKU: CS238MG
Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g (US Warehouse)

45 g

Corona DS339HV Digital Metal Gear Servo 5.1kg / 0.13 Sec / 32g (US Warehouse)
SKU: 014000004
Corona DS339HV Digital Metal Gear Servo 5.1kg / 0.13 Sec / 32g (US Warehouse)

57 g

Corona DS339MG Digital Metal Gear Servo 4.4kg / 0.15sec / 32g (US Warehouse)
SKU: DS339MG
Corona DS339MG Digital Metal Gear Servo 4.4kg / 0.15sec / 32g (US Warehouse)

58 g

Join to our channels: new products, coupons, best deals:
Copyright © 2011—2025 | RCSearch.info | Manych project
↑