Pixracer R14 F4

Pixracer R14 F4 Flight Controller With CNC Protective Case ESP8266 Wifi Module Micro SD Card Buzzer
Overview:
The new Release Pixracer R14 is available now and its fully supported by the Arducopter and PX4 Flight stack. Its a
genuine open source project, already running with PX 4 stack software-QGroundControl (QGC), as well with Arducopter
/ Mission Planner (MP). Compare to the V1.0 version, the R14 Version fixed Spektrum satellite binding issue.
The Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. Its coming with an upgraded Invensense Sensor
generation (bye bye tricky LSM 303), a plug in WIFI board and last not least with a 2MB Flash : A real upgrade compared to
former versions.

Specification:
Item name: Pixracer R14 flight controller
MCU: STM32F427VIT6 rev.3
PCB dimension: 36mm*36mm
Mounting hole: 30.5x30.5mm with 3.2mm hole
Pixracer weight: 26g(with SD and CNC protective case)
FRAM: FM25V02-G
Power supply: 5-5.5V DC from USB or Power module
Sensors: MPU9250 , ICM20608 , MS5611, HMC5983
LDO Ultra low noise LDOs for sensors and FMU

Features:
-Connectors: GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 (TxD, RxD, CTS, RTS), USART2(TxD,RxD, CTS, RTS),
FRSky-IN, FRSky-OUT, CAN, USART8 (TxD, RxD), ESP8266 (full set), SERVO1-SERVO6, USART7 (TxD, RxD), JTAG (SWDIO, SWCLK),
POWER-BRICK (VDD, Voltage, Current, GND)
-BUZZER-LED_BUTTON
-MicroSD card reader
-RGB LED
-Micro USB
-WiFi ESP8266 802.11bgn (Included)
This popular add on is a very versatile solution, you might want to check its wiki as well: http://www.esp8266.com/wiki/doku.php...th-the-esp8266
-JST GH series connectors for easy and robust peripheral connections, DF13 haters will love those !
-5 kinds of professional flexible silicone cables for almost any peripheral module included.

User Manuals for ESP8266 and Pixracer: https://pixhawk.org/peripherals/8266

Discussion: http://www.rcgroups.com/forums/showthread.php?t=2576614

Package included:
1x Pixracer R14 Flight controller
1x CNC Aluminum alloy protective shell
1x ESP8266 Wifi module
1x Safety switcher
1x Buzzer
1x Micro SD Card
1x SD Card reader
1x Cables set(For Receiver, GPS, I2C ,Power module , Serial)