RA Cores EPP BluFO 635mm (25")

Introducing the EPP BluFO! We like this plane because of its gentle but precise flight characteristics and its super slow flight envelope with super durable EPP foam. It has plenty of room for a small FPV system in the nose and a very accessible equipment bay. Add LEDs internally and along the edges to have tons of fun cruising slowly at night. The 25" wing span makes it super easy to travel with. 

• Battery: 1000 to 1300 mAh 3S lipo
• Propeller: Slow fly APC or GWS 8-9"
• Suggested starting CG should be 12.20" back from the nose. (roughly where the hatch magnet is)
• Motor: 2208-2812 1200-1600kv
• Servos: Any 9g servo (2x)
• ESC: 18-20A
• Suggested starting throws: (We personally use max travel and speed on our servos)
  • Aileron 0.4" up & down (0.8" total) 30% expo
  • Elevator 0.55" up & down (1.1" total) 20% expo
• Paint - Any spray paint is fine. We suggest florescent marking paint.
  • Tip - Paint your plane after you build the main wing, but before you attach anything to it. 
• Glue: We suggest either Welders or Foam-Tac
• ​RCGroups.com Thread
• Instruction Manual

Includes:

• Pre-cut EPP foam parts
• Pre-cut CF Strips 
• Control Linkage and horns
• Motor Mount
• Magnets for Canopy
• Instruction Manual