TBS Caipirinha 2 930mm

The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance slopeing highly enjoyable.

We can confidently say it's going to be the only long range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope. 

Features

• Small, lightweight, fly anywhere design
• Ultimate in flight stability and endurance
• Virtually indestructible EPP/Plywood construction
• Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
• 2x push-to-open equipment bays for R/C and FPV electronics
• Pre-cut, sanded and covered ultra-lightweight elevons & pushrods

Specifications

• 36.5in / 93cm wingspan!
• 50oz / 1400g AUW (including GoPro Session5 and battery)
• 90min flying time
• 45mi / 75km endurance
• Battery (4S):
  
  • Capacity: 4500mAh 4S - 6600mAh 4S, 20C or more
  • SUGGESTED Dimension: 48 x 36 x 150 mm, 525g
  • MAX Dimension: 60 x 44 x 165 mm, 550g

Recommended FPV and Radio equipment

• FPV camera: TBS ZeroZero II or TBS69
• Video transmission:
  
  • 5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO
  • 2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx
• Crossfire Micro Rx or Diversity Rx

Preliminary Manual (for experts only):

1. Lay out electronics (dry-fit)
2. Glue wing halves together
3. Set up radio gear and electronics
4. Set elevon travel +8mm, -6mm
5. AIL EXPO 60%, ELE EXPO 50%
6. Mount propeller
7. Fly, Crash, Repair, Repeat!