Eachine Twig HD 115mm 3" F4 3S Caddx Baby Turtle BNF Frsky D8

Specifications:
Brand Name: Eachine
Item Name: 115mm Twig 3 Inch 3S Brushless FPV drone
Wheelbase: 115mm
Size: 105mm*100mm*45mm(without propellers)
Weight: Twig115 60g(without battery)
Twig115 HD 72g(without battery)

Features:
New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Built-in SPI Frsky D8 receiver
Compatible both for 2s-3s Lipo/LIHV
Runcam Nano2 version or Caddx Baby Turtle HD version
Support to add external SBUS receiver (Frsky XM+ , RXSR) to get better range by reserved receiver wire.

Spare parts specifications:

Motor	Mode: EX1105 KV5200 Configu-ration:9N12P Stator Diamter:11mm Stator Length:5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ14mm*17mm Weight(g):5.6g No.of Cells(Lipo):2S-3S
Flight controller	(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 7-17V) Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry Could add external receiver on the FC board Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 70A Current meter scale set to 470 Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 10A continuous peak 12A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_5.HEX Default protocol: DSHOT600
Frsky NON-EU receiver Version	SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m
VTX	Output power: 25~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready Weight: 3g
Runcam NANO2 version	Model: Nano 2 Image Sensor: 1/3" CMOS Horizontal Resolution: 700TVL Lens: 2.1mm(M8) FOV 155° Signal System: NTSC / PAL S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current : 110mA@5V [email protected] Housing Material: ABS Net Weight: 3.2g Dimensions: L14mm*W14mm*H16mm
Caddx Baby turtle version	TV system: NTSC/PAL changeable Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps Power Input: DC 4.5-20V Mini Illumination: 0.01lux Image Resolution: 2 Megapixels Working Current: 380mA@5V/160mA@12V (low consumption) OSD Menu: Yes (Support Voltage Display) Video Files: MP4 Audio: Support Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

How to add Flysky or DSM2/DSMX receiver for Crazybee V3.0 _Both version available? Click Here.

Package includes:
1 x Twig 115 2.5mm Frame
1 x Crazybee F4FR V3.0 PRO FC built-in Frsky NON-EU RX
4 x 1105 KV5200 Motor
1 x Gemfan 3025 3 Inch Propeller(4cw+4ccw)
1 x Camera option1 : Runcam Nano2 / Camera option2: CADDX Baby turtle
1 x 5.8g 25mw~200mw Switchable VTX
1 x Propeller Disassemble Tool
1 x Screwdriver