iFlight Cidora SL5 Freestyle 5" F7 X2306 PNP

We are proud to offer a Cidora SL5 6S FPV Drone - BNF with our best iFlight components installed and pre-tuned! SL5 is a 5" size BNF (Bind-and-Fly) quadcopter that comes fully built with everything you need to liftoff!
Different power version (4S, 6S cell count) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio.

Specifications:
- Total Dimensions: 165*138mm (body dimension)
- Frame Wheelbase: 215mm
- SucceXF7 TwinG Bluetooth FC
- SucceX 50A 2-6s 4-in-1 ESC Dshot1200
- XING CAMO X2306 1700KV(6S)
- Caddx.us Ratel 2.1mm FPV cam
- Nazgul 5140 propellers
- Weight: 384.2 (without for GoPro TPU mount)

SucceX F7 TwinG BT Flight Controller(TwinICM20689)	- MCU: 216MHz STM32F722RET6  - Gyro: 2x ICM20689(SPI) - Baro: Yes (Altitude on your OSD) - Betaflight OSD: YES  - Bluetooth wireless adapter (Antenna integrated, can be linked to the SpeedyBee smartphone app) - Blackbox: Onboard 32MB - 5x Uarts - 8x Motor outputs - 8-pin 4in1 ESC port - 4-pin VTX connector Betaflight  -Betaflight Firmware: betaflight_4.0.5_STM32F7X2.hex -CLI dump file: IFLIGHTF7_TWIN_G.config Physical  - Mounting hole: 30.5*30.5mm, φ4mm with Grommets φ3mm  -Size: 36*36mm  -Weight: 6.2g
SucceX 50A 2-6S 4-in-1 ESC Dshot1200	- Dimension: 43*39mm - Mounting Holes: 30.5*30.5mm/Φ3mm - Weight:14.4g - Volts input: 2-6S - STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware - Current sensor: Yes -Telemetry: Supported - BEC: No - Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc. - Target: iFlight-BL32-4IN1 - BLHeliSuite download (BL32):http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file
5.8G 1000mW VTX	- Tramp telemetry with OSD/Lua script frequency and output power control - Stable power transmission, ideal for long range flights - Power settings 25mW/200mW/400mW/800mW/1000mW; - 48 Channels including Raceband - Frequency fast lock, soft start to reduce interference with other pilots - Built-in output power self-check function; - Full format video format: NTSC /PAL; - Wide input voltage range. low power consumption: - 7V~28V, +12V/500mA@1000mW; - Small size: 36mm×36mm×8mm; - Mounting holes 4-M3 - Lightweight: ≤11g(excluding antenna)

Features:
- Full 3K Carbon Fiber airframe
- Easy arm swaps -215mm wheelbase, 115g
- Popular Squish X configuration
- SucceX F7 TwinG Bluetooth with 50A 4in1 ESC stack

Recommend Parts (Not included):
-TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
-TPU 3D Printed Camera Mount for GoPro Session

Package Included:
1x Cidora SL5 6S FPV Racing Drone 
2 x Nazgul 5140 propellers (4xcw, 4xccw)
1 x LED Lights