Matek F405-CTR + 5.8G VTX-HV

Multirotors → FPV Racing drones → Flight controllers → F4 FCs → FC F4 + VTX → Matek F405-CTR + 5.8G VTX-HV

in the store

FREE SHIPPING
Out of stock

Matek BetaFlight F405-CTR Flight Controller Built-in PDB + Matek 5.8G Video Transmitter VTX-HV
Specification:
Matek F405-CTR (User manual):
Brand name: Matek Systems
Item name: BetaFlight F405-CTR
Size: 36x46mm PCB with 30.5mm mounting holes
Weight: 10g

FC:

MCU: 168MHz STM32F405

IMU: MPU6000 accelerometer/gyro (SPI)

Baro: BMP280 (I2C)

OSD: BetaFlight OSD w/ AT7456E chip

Blackbox: MicroSD card slot (SD/SDHC)

VCP, UART1, UART2, UART3, UART4, UART5

Built in inverter for SBUS input (UART2-RX)

PPM/UART Shared: UART2-RX

SoftSerial on TX2, S5 or S6 optional

Camera control on S6 or DAC optional

Smartaudio & Tramp VTX protocol supported

WS2812 Led Strip : Yes

Beeper : Yes

RSSI: Yes

PDB:

Input: 6~30V (3~6S LiPo) w/TVS protection

PDB: 4x30A (Max.4x46A), 6 layers*2oz copper PCB

BEC: 5V 2A cont. (Max.3A)

LDO 3.3V: Max.300mA for Spektrum RX

Current Sensor 184A (Scale 179)

Battery Voltage Sensor: 1:10 (Scale 110)

Matek 5.8G VTX-HV MMCX Ver.(user manual):

Input voltage: 7~27V(2~6S LiPo)

40 standard channels, A/B/E/F/R Band

Output Power: 25, 200, 500mW switchable

BEC Output: 5V/1A for Camera or FC

Traditional button+LED control of frequency and power

BFCMS control via FC UART _TX

Firmware upgradeable

Power Consumption: 3.1W Max. @ 500mW

Video Input Impedance: 75 Ohm

Audio Subcarrier Frequency: 6.5 MHz

RF Connector: U.FL (IPEX)

Video Format: NTSC/PAL

Weight: 6g (Tx only, w/o SMA cable)

Size: 36*22*6.5mm w/30.5mm mounting

Package included:
1x Matek Systems BetaFlight F405-CTR
1x Rubycon ZLH 35V/470uF (Low ESR)
6x silicon grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm

1x 5.8G Video transmitter (MMCX)
1x PVC Heat-shrink tube
1x MMCX to SMA Female, RG178 cable 9cm