Omnibus F745 V2

Omnibus F7 V2 Flight Controller STM32 F745 MCU 2-4S Built in Betaflight OSD Dual Gyro 30.5x30.5mm
 
OMNIBUS F7 V2 now with inertial damping gyro jacket. The case mass absorbs & resists by inertial damping the vibrations coming from the motors, props, frame,  ect... -  The added crash protection. The case is mounted by Gell tape and not hard mounted to the airframe in the same way a normal gyro is isolated. In our testing  this does work better then soft mounting the whole Flight Controller.
 
Description:
Item name: Omnibus F7 V2 flight controller
MCU: STM32 F745 (Spi connected to Gyro), STM32F745VG
MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
IMC268 (the 6 axis SPI Gyrometer + Accelerometer)
D-shot Support
Dual Gyro
Baro
BF OSD
microSD
Blackbox
Size: 36x36mm
Mount holes: 30.5x30.5mm
Weight: 10g
Default firmware: betaflight_3.2.0_OMNIBUSF7V2
SBUS, IBUS, DSM2, DSMX Receiver configuration: UART2

Features:
F7 MCU - faster than the current F3 and F4 processors.
Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz.
Built in betaflight OSD
36x36mm, mount holes 30.5x30.5mm.
SD card reader for recording black box data (SD card not included).
Supports 2-4S natively
5V/3A regulator
Port for easy connection to 30A 4-IN-1 ESC (SH1.0 8P)
 
Package included:
1 x flight controller
1 x SH1.0 6P cable
1 x SH1.0 8P cable