Join to our channels: new products, coupons, best deals:
Whoop Flight Controllers
HappyModel Crazybee F4 PRO V2 PNP No Receiver
Multirotors → Tinywhoops → Whoop Flight Controllers → Brushless Whoop FC → HappyModel Crazybee F4 PRO V2 PNP No ReceiverCrazybee F4 Pro V2.0 Mobula7 HD 1-3S Flight Controller w/ 5A ESC & Compatible Flysky/Frsky/DSMX Receiver
Diffrence from V1.0:
Brand Name: Happymodel
Item Name: Crazybee F4 Pro V2 Flight Controller
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver,
without receiver version doesn't have rx)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
Firmware
Diffrence from V1.0:
- V2.0 could handle 1-3S Lipo/LiHV ( V1.0 only 1-2s Lipo/LiHV)
- V2.0 use bigger bind and boot button , change the BAT/GND pad to “through hole”
Specification:Brand Name: Happymodel
Item Name: Crazybee F4 Pro V2 Flight Controller
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver,
without receiver version doesn't have rx)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
Firmware
(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS
(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX
(No RX version) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX
Onboard 5A 4 In 1 ESC
Onboard 5A 4 In 1 ESC
MCU upgraded to EFM8BB21
Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Onboard Receiver
Frsky version: Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version: Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible)
DSMX version: Built-in Serial-based DSM2/DSMX compatible satellite receiver
(Default RX2 was used for DSM2/DSMX receiver)
No RX version: support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Package Included:
1x Crazybee F4 Pro V2.0 Flight Controller
Onboard Receiver
Frsky version: Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version: Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible)
DSMX version: Built-in Serial-based DSM2/DSMX compatible satellite receiver
(Default RX2 was used for DSM2/DSMX receiver)
No RX version: support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Package Included:
1x Crazybee F4 Pro V2.0 Flight Controller
Share
Prices for HappyModel Crazybee F4 PRO V2 PNP No Receiver in stores
Deals found: 38 (AliExpress1)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
AliExpress | Out of stock | $48 | 1 | $48 |
See also
HappyModel Crazybee F4 PRO V2 BNF FrSky
$46
HappyModel Crazybee F4 PRO V2 BNF FlySky
$51
HappyModel Crazybee F4 PRO V2 BNF DSM
$49
Happymodel XT30 Plug + Wire + 100uF Capacitor for whoops
$0.96
Brushless Whoop FC
Larva X HD Parts