Join to our channels: new products, coupons, best deals:
Flight controllers
Airbot F7 AIO
Multirotors → FPV Racing drones → Flight controllers → F7 FCs → Airbot F7 AIOOriginal Airbot F7 Flight Controller AIO Betaflight OSD 5V BEC for RC Drone
Specificaiton: ( New Manual)
Brand Name: Airbot
Item Name: F7 Flight Controller AIO OSD BEC
MCU: STM32F722
Input Voltage: 3-6S Lipo
- Betaflight OSD
- BEC: 5V @ 2A
Size: 36x36mm
Mounting Hole: 30.5x30.5mm
Features:
Specificaiton: ( New Manual)
Brand Name: Airbot
Item Name: F7 Flight Controller AIO OSD BEC
MCU: STM32F722
Input Voltage: 3-6S Lipo
- Betaflight OSD
- BEC: 5V @ 2A
Size: 36x36mm
Mounting Hole: 30.5x30.5mm
Features:
• STM32 F722 MCU, Runs Betaflight firmware
• ICM Gyro Over SPI Bus
• 30.5*30.5 mm Mounting holes
• Supports Lipo direct plugin (3-6S)
• Supports 5V 2A BEC output (Buck)
• STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
• More UARTs (6xUARTs)
• Supports camera control function
• Supports ext. Gyro box
• Onboard 128Mbit(16MB) flash for balckbox
Resources Setting:
Resources Setting:
Function | Solder Pad Silk Screen | Resources | MCU Pin | Notes |
SBUS | SB | RX 1 | PA10 | |
DSM2 | TX1 | TX 1 | PA9 | CLI: serialrx_halfduplex set to ON |
Smart Audio VTX | S/A | TX 5 | PC12 | |
Smartport | S.P | TX 4 | PA0 | |
ESC Telemetry | TLM | TX 2 | PA2 | CLI: set esc_sensor_halfduplex = ON |
Camera Control | CC | PA8 | ||
SDA | SDA | I2C1_SDA | PB9 | Ext. Pull up needed |
SCL | SCL | I2C1_SCL | PB8 | |
GPS | RX6/TX6 | UART 6 | PC6/7 | |
WS2812B LED | LED | PA15 | ||
Buzzer | Bz-/Bz+ | PB0 |
Share
Prices for Airbot F7 AIO in stores
Deals found: 5 (Banggood1)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
Banggood | Out of stock | $49 | 1 | $49 |
See also
F7 FCs