FlySky FS-R4M 2.4GHz 4CH ANT PWM Receiver

FlySky FS-R4M 2.4GHz 4CH ANT Mini RC Receiver PWM Output Compatible FS-G7P/FS-G4P Radio Transmitter for RC Mini Car

OVERVIEW:

FS-R4M based on ANT protocol is a 4-channel mini receiver with single external antenna, bidirectional transmission and micro size. It adapts micro/mini cars.

Specifications:

Brand Name: FlySky

Item Name: FS-R4M RC Receiver

Model: FS-R4M

Adaptive transmitters: Transmitters with ANT protocol, such as FS-G7P/FS-R4P

Adaptive Models: Mini/micro cars

Numbers of Channels: 4

RF: 2.4GHz ISM

Maximum Power:<10dBm(e.i.r.p.) (EU)

Antenna: Single Antenna

Distance: >50m(ground)

2.4G Protocol: ANT

Resolution: 1024

Data Output: PWM

Input Voltage Range: 3.5-9V/DC

Online Update: Yes

Temperature Range: -10°C ~ +60°C

Humidity Limit: 20% ~ 95%

Dimensions: 20.0*13.0*7.2mm

Weight: 3g

Certification: CE, FCC ID: 2A2UNR4M00

The receiver is compatible with the transmitters with ANT protocol,such as FS-G7P or FS-G4P

Binding:

The receiver will automatically enter the bind mode when it is powered on.It support two-way binding and one-way binding.The transmitter will display the information returnede from the receiver after the two-way binding is completed.

Follow the steps below to bind in two-way binding:

- Select [ANT 2 WAY) for RF standard of the transmitter, then put the transmitter in bind mode.

- When the receiver is powered on and waits for two seconds, it will automatically enter the bind mode if it does not connect to the

transmitter, and the LED of the receiver should be flashing,

- When the LED of the receiver is solid on, the binding process should be complete. The transmitter exits the bind mode automaticlly.

- Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.

Follow the steps below to bind in one-way binding:

- Select [ANT 1 WAY) for RF standard of the transmitter, then put the transmitter in bind mode.

- When the receiver is powered on and waits for two seconds, it will automatically enter the bind mode if it does not connect to the

transmitter, and the LED of the receiver should be flashing,

- When the LED of the receiver is in slow flashing state, the binding process should be completed. You need to manually put the transmitter to

exit the bind mode. Then the LED of the receiver is solid on, indicating that the binding process is completed.

- Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.

Note:

Put the transmitter in bind mode first, then put the receiver in bind mode. If the binding is not completed within ten seconds, the LED of the receiver will enter its slow flashing state.

Package Included:

1 x FS-R4M RC Receiver