EWRF Brown bear 007 VTX 5.8G 25-400mW

Features:
Adjustable 4 modes:25mW/200mW/400mW/OFF
Betaflight/Cleanflight OSD configuring parameter
Clean powerup and channel switching without interference to others

Specifications:

Brand: EWRF
Model: Brown bear 007
Frequency: 5.8G 40CH
Transmitting Power：25mW/200mW/400mW/OFF(Pitmode)
Power supply：DC5V（4.5V-5.5V）
Current(12v)：300mA（25mW）/510mA（200mW）/720mA（400mW）

Peripheral size: 21*21mm

Hole distance: 16*16mm

Weight: 1.3g
Standard size: 21.1*21.1*3.2mm

User Guide
1.LED indication
The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands, flashing 3 times means selecting the power levels).
The blue LED indicates the state of Pitmode or the value of item when setting the VTX( e.g. when selecting the channels, 3 times of flashing means channel 3. When selecting the bands, 3 times of flashing means band C.As for the item of power levels,3 times of flashing means at the power level of 400mW)

2.Working mode indication
After powering up, the red & blue LEDs will signal the following three items of VTX in turn: channel, band and power level(the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes.
Normal: The red & blue LED are on.
Pitmode:The red LED is on and blue LED is off.

3. Setting
Press and hold the button until the red LED flash 1 time which means the item of channel selecting, then press the button can select the channels（blue LED flashing times corresponds to the channel 1-8）.
Press and hold the button again，the red LED will flash 2 times which means the item of band selecting, then press the button can select the band（blue LED flashing times corresponds to the band A-E）.
Press and hold the button again，the red LED will flash 3 times which means the item of power level selecting, then press the button can select the power（blue LED flashing times corresponds to the power level）.
Finally, press and hold the button, save and exit the setting of VTX(This step is essential for setting).
Press the button twice will toggle the ON/OFF of Pitmode.

For Betaflight/Cleanflight OSD setting of channel,band,power and Pitmode ,please referring to ‘Betaflight OSD setting of EWRF Transmitter’for details.

Package Included:

1x VTX

1x VTX Wiring

1x UFL Rat tail antenna

1x Electrostatic bag packaging