Join to our channels: new products, coupons, best deals:

Flight controllers

FETtec G4 AIO 35A

Multirotors → FPV Racing drones → Flight controllers → G4 FCs → FETtec G4 AIO 35A
FETtec G4 AIO 35A
MCU:G4
Gyro:MPU6000
OSD:+
Power :3S-6S
5V BEC:2x0.6A
ESC type:built in
ESC:35Ax4
UART Rx:5
UART Tx:5
LED pad:+
Size:37.5 x 30 x 7.9mmmm
Mount Holes:20 x 20mmmm
Weight:8.9g

Features

FC

  • Latest STM32G4 Processor
    • 170Mhz + Math accelerator
    • MPU6000
  • Supply voltage 12-25V (3S-6S Lipo voltage)
  • 2x dedicated onboard 5V BEC for VTX (max. 600mA each)
    • 5V BEC for RX
    • 5V/16V BEC for VTX (switchable and real Pit*)
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
    • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
  • 2x 4 pin connector for receiver and VTX
    • Signal, telemetry, 5V, gnd
    • Gnd, 5V, TX1, RX1
  • 5 UART serials
    • UART 1 free
    • UART 2 used for Receiver
    • UART 3 free
    • UART 4 used for onboard OSD, can be set free
    • UART 5 used for ESCs / TLM / Onewire
  • Solder pad for RGB LEDs
  • Supported ESC protocols
    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
  • KISS FC firmware
  • *real Pit-Mode: A power supply pin which is remotely switchable

ESC

  • Active current limiting @ 35A
  • Input voltage: 3s-6s
  • High quality 40V MOSFETs
  • STM32G071 @ 64MHz
  • up to 128 kHz Motor PWM
  • Full sine wave control
  • Automatic input signal detection
    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
  • FETtec ESC firmware

OSD

  • Onboard OSD
    • Graphic OSD (STM32)
    • Full KISS Tuning
    • Filter (PIDs, Rates, Settings)
    • LED control (RGB LED, Racewire)
    • VTX
    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
    • KISS GPS support + live map
    • Custom graphic pilot logo
    • Stick overlay
    • Custom layout
    • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

Dimensions

  • Maximum outside dimensions: 30 x 37.5mm
  • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)
  • Overall height: 7.9mm
  • Weight: 8.9 g

Software

  • KISS Firmware - Softwareupdate via FETtec Configurator
  • FETtec ESCs Firmware - Softwareupdate via FETtec Configurator
  • FETtec OSD - Softwareupdate via FETtec Configurator

Scope of delivery

  • 1x FETtec AIO 35A
  • 1x Capacitor 50V 470µF
  • 2x 4 pin cable with JST connector on one side
  • 1x 8 pin cable with JST connector on one side
  • Standoffs
Share

Prices for FETtec G4 AIO 35A in stores

Deals found: 11 (RCPapa1)

StoreStock levelLot priceShipping costCoupon / promocodePcs./lot1pc price
RCPapaOut of stock$1201$120

See also

G4 FCs
G4 FCs
Join to our channels: new products, coupons, best deals:
↑