iFlight Alpha C85 2" 85mm 4S Runcam Nano 2 PNP

Multirotors → Tinywhoops → Cinewhoops → iFlight Alpha C85 2" 85mm 4S Runcam Nano 2 PNP

The long requested BNF is finally ready for everyone! Our converted Alpha C85 in a popular CineWhoop pusher configuration for a Insta360 or naked GoPro Hero to shoot the most insane footage ever. Camera and camera case not included but sold separately!

iFlight Naked GoPro Hero 8 Case TPU with BEC Board: LINK

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features：

Pusher configuration style frame kit
Butter smooth XING1303 5000KV for more torque and efficiency with longer flight times compared to 11xx motors
Camera and batteries are placed on the top of the drone for better CG and better control
Universal camera mount for various cams and insane footage
Pre-tuned with smooth cinematic settings

Alpha C85 Analog BNF Specs:

SucceX-D 20A Whoop F4 AIO Board
XING 1303 5000KV FPV Micro Motor
Wheelbase: 85mm
Body size: 60*60mm
Ducted propeller size: 2 inch (85mm)
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Weight: 103.2g (without battery)
Flight time cruising incl. naked Hero8: 3-4 min (4S 450mAh), 5-6min (4S 650mAh)

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Alpha C85 Analog Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x Alpha-C 85mm Frame
1x Runcam Nano2 Camera
1x 5.8G SucceX Micro Force VTX 300mW
1x Albatross RHCP ipex 5.8g light antenna
2sets HQ 2 inch 4-blades (each 4 props - Color May Vary)
1x iFlight Lipo Strap

FC // SucceX-D 20A F4 Whoop AIO

*Size：30.5*30.5mm

*Mounting pattern：25.5*25.5mm/φ3mm

*Connector：Micro-USB

*MCU：STM32F411

*Gyro：MPU6000

*Blackbox：8MB

*BEC output：5V 2A

*INA pad：UART2 (nR2)

*Barometer：no

*Constant current：20A，25A（Burst）

*Input：2-4S

*Current sensor：yes

*BLHeli：BLHeli-S

*ESC Telemetry：no

*Target：IFLIGHT_F411_PRO

*ESC Firmware：G-H-30 BLS

5.8GHz SucceX Micro 300mW VTX

-Power: PIT/25/100/200mW/300mW

-Antenna interface: IPEX (UFL)

-VTX protocol : IRC Tramp

-Size: 13.5x14.5mm

-Weight: 1.4g

- Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g

Additional Suggested Parts

Battery 4S 450mAh

Prices for iFlight Alpha C85 2" 85mm 4S Runcam Nano 2 PNP in stores

Deals found: 1 ()

Tinywhoops

iFlight Alpha C85 2" 85mm 4S Runcam Nano 2 PNP

Prices for iFlight Alpha C85 2" 85mm 4S Runcam Nano 2 PNP in stores

See also