3" Drones with DJI Digital HD FPV System
iFlight TITAN H3 HD 3" 4S DJI Air Unit + FPV Goggles V2
FPV → HD Video Links → DJI FPV Digital HD → Drones with DJI Digital HD FPV System → 3" Drones with DJI Digital HD FPV System → iFlight TITAN H3 HD 3" DJI Air Unit PNP → iFlight TITAN H3 HD 3" 4S DJI Air Unit + FPV Goggles V2Brand Name: iFlight
Model: TITAN H3 HD
Item Name: 150mm F7 4S 3 Inch FPV Racing Drone
Wheelbase: 150mm
Weight: 170.6 (without battery)
SucceX-D Mini F7 Flight Controller (TwinG) | MCU: 216MHz STM32F722 Gyro: 2x ICM20689 Blackbox: 32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale: 100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad : Yes RSSI input pad: No UARTs:5 Motor outputs: 4 BLHeli32 Telemetry: RX5 Input voltage: recommended 2-6S, MAX 6S Firmware target: IFLIGHT_F722_TWING Mounting pattern: 20*20mm φ3 Dimensions: 29*29mm USB type-C |
SucceX-E Mini 35A BL_S 4in1 ESC | MCU: BB21 F16G BLHeli_S Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 35A / Burst: 40A BEC: No Target: G-H-30 Weight:6.9g Mounting pattern: 20*20, φ3mm with Grommets φ2mm Dimensions: 31*30mm (including the power pads) |
XING 1404 4600KV Brushless Motor | Configuration: 9N12P |
Receiver | Built-in DJI Receiver, compatible with DJI Remote Controller ( DJI Remote Controller NOT Included) |
DJI Air Unit HD Digital System | DESCRIPTION Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each) Dimensions Air Unit: 44 x 37.8 x 14.4 mm Camera: 27.4 x 21.1 x 20.1 mm Coaxial Cable: 100 mm SPECIFICATION Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g |
DJI FPV Goggles V2 | Weight: Approx. 420 g (headband and antennas included) Dimensions: 202×126×110 mm (antennas included), 184×122×110 mm (antennas excluded) Screen Size: 2-inch × 2 Screen Resolution (Single Screen): 1440 × 810 Screen Renew Rate: 144 Hz Communication Frequency: 2.400 - 2.4835 GHz*; 5.725-5.850 GHz *Only supports 5.8Ghz when used with DJI FPV Air Unit Transmitter Power (EIRP): 2.400 - 2.4835 GHz FCC/MIC: ≤28.5 dBm; CE: ≤20 dBm; SRRC: ≤20 dBm; MIC: ≤20 dBm 5.725-5.850 GHz FCC/MIC: ≤31.5 dBm; CE: ≤14 dBm; SRRC: ≤19 dBm Live View Mode: Low-Latency Mode (810p 120fps); High-Quality Mode (810p 60fps) Video Format: MP4 (Video format: H.264) Supported Video Play Format: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3) Operating Temperature: 32° to 104° F (0° to 40° C) FOV: Adjustable from 30° to 54°. Adjustable image size from 50%-100% Interpupillar Distance Range: 58 -70 mm Supported Storage Card: microSD cards with storage capacities of up to 256GB. |
Features
- Equipped with SucceX-D Mini F7 + 35A BL_S ESC Stack
- Bind and Fly Built and test flown
- Equipped with the DJI FPV Air Unit -Bind and Fly
- Buttery-smooth 720p 120fps FPV feed
- Pre-tuned with smooth freestyle settings
- Full 3K Carbon Fiber airframe with chamfered arms
- Equipped with XING 1404 4600KV motors
Additional Suggested Parts (not included)
Recommend Use with 4S 650mAh-850mAh Lipo Battery ( Click Here buy together)
DJI Remote Controller ( Link )
Package Included:
1x DJI FPV Goggles V2
1x TITAN H3 HD Frame
1x DJI Digital HD FPV Air Unit (FPV Camera + Air Unit Module)
1x iFlight Lipo Strap
2x HQ T3x3x3 Propeller (Set of 4 - Color May Vary)
4x XING 1404 4600KV Motor
1x SucceX-D Mini F7 Flight Controller
1x SucceX-E Mini 35A 4-in-1 ESC BLheliS 2-6S
2x DJI FPV Air Unit Antenna (MMCX 90° - Pair) (From Air Unit Packaging)