iFlight Alpha A75 HD 3S Caddx Nebula + DJI FPV Goggles V2

FPV → HD Video Links → DJI FPV Digital HD → Drones with DJI Digital HD FPV System → ≤2" Drones with DJI Digital HD FPV System → iFlight Alpha A75 HD DJI Caddx Nebula PNP → iFlight Alpha A75 HD 3S Caddx Nebula + DJI FPV Goggles V2

Brand Name: iFlight

Model: A75 HD

Item Name: 78mm F4 3S Whoop FPV Racing Drone with Caddx Nebula HD Digital System

Body Size: 102.9x102.9mm

Weight: 66.9g (without battery)

SucceX-D 20A Whoop F4 AIO FC ESC	Size: 30.5*30.5mm ( Mounting Hole: 25.5x25.5mm, M3) Connector: Micro-USB MCU: STM32F411 Gyroscope: MPU6000 Blackbox: 8MB BEC Output: 5V 2A INA pad: nR2 Barometer: no Constant Current: 20A，Burst Current: 25A Input: 2-4S Current Sensor: yes BLHeli: BLHeli_S ESC Telemetry：no Firmware Target: IFLIGHT_F411_PRO ESC Firmware：G-H-30 BLS
XING-E 1103 8000KV Brushless Motor	Height: 10.2mm Weight: about 3.8g(with 30AWG 32mm length) Shaft: φ1.5mm Motor Mount Holes: M1.6 on Dia 8.5mm KV: 8000KV Input Voltage Voltage: 2-3S Lipo battery - 32mm wire without plugs
HQProp 40mm & Gemfan 1635 4-Blade Propeller	Item Name: HQProp 40mm & Gemfan 1635 4-Blade Propeller Quantity: 4 CW & 4 CCW ( HQProp 2 Pairs & Gemfan 2 Pairs) Color: Color May Vary
Caddx Nebula HD Digital System	Model: Vista KIT Weight: Vista KIT(camera included):24g/Antenna:2.5g Dimensions: Vista Kit: 30x29x13mm Camera: 14x14x21mm Coaxial Cable:80mm/120mm Operating Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm Min. Latency (end-to-end):720p 60fps: 32ms Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km I/O Interface: USB-C,IPEX,3-in-1 Port Supported Flight Control System: F3,F4,F7 Operating Temperature Range: 32° to 104° F (0℃ ~40℃) Input Power: 7.4-26.4V Power output: 25mW/200mW/500mW/700mW Hardware included:Vista/Nebula nano/Coaxial cable/Antenna Goggles: work with DJI goggles Camera:Sensor: 1/3''CMOS Lens: 2.1mm,f/2.1 Shutter: Rolling shutter FOV: 150°[D],122°[H],93°[V]
Receiver	Built-in DJI Receiver, Compatible with DJI Remote Controller
DJI FPV Goggles V2	DJI FPV Goggles V2 Weight: Approx. 420 g (headband and antennas included) Dimensions: 202×126×110 mm (antennas included), 184×122×110 mm (antennas excluded) Screen Size: 2-inch × 2 Screen Resolution (Single Screen): 1440 × 810 Screen Renew Rate: 144 Hz Communication Frequency: 2.400 - 2.4835 GHz*; 5.725-5.850 GHz Transmitter Power (EIRP): 2.400 - 2.4835 GHz Live View Mode: Low-Latency Mode (810p 120fps); High-Quality Mode (810p 60fps) Video Format: MP4 (Video format: H.264) Supported Video Play Format: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3) Operating Temperature: 32° to 104° F (0° to 40° C) FOV: Adjustable from 30° to 54°. Adjustable image size from 50%-100% Interpupillar Distance Range: 58 -70 mm Supported Storage Card: microSD cards with storage capacities of up to 256GB. DJI FPV Goggles Battery Capacity: 1800 mAh Voltage: 9 V (Max.) Type: LiPo 2S Charging Temperature: 0℃ to 45℃ Energy: 18 Wh Max Charging Power: 10 W Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level)

Features:

- 66.9 grams (without battery)
- Butter smooth XING 1103 8000KV，more torque and efficiency
- Ducts to protect the sensitive environment or yourself
- Pre-tuned with smooth cinematic settings
- iFlight Albatross 5.8G light antenna upgrade (included)
- iFlight Albatross 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)

Recommend buy Additional Parts together:

3S 450mAh 70C Lipo XT30 Lipo Battery ( Link)

DJI Remote Controller ( Link)

Pacakge Included:

Prebuilt and tested
1x Alpha 78mm Frame

1x SucceX-D 20A Whoop F4 AIO FC ESC Board

4x iFlight XING-E 1103 Motor
1x Caddx Nebula Digital HD System Kit
1x Albatross LHCP ipex 5.8g light Antenna
2x HQ 40mm 4-Blade Prop CW

2x HQ 40mm 4-Blade Prop CCW

2x Gemfan 40mm 1.6inch 1635 3-Blade Propeller CW

2x Gemfan 40mm 1.6inch 1635 3-Blade Propeller CCW
2x 10*130mm iFlight Lipo Strap

1x DJI FPV Goggles V2

1x DJI FPV Goggles Battery