Flywoo GOKU GN745 AIO F7 6S 40A BLHeli_32 4in1 ESC

Multirotors → FPV Racing drones → Flight controllers → F7 FCs → FC F7 AIO built-in ESC 4in1 → Flywoo GOKU GN745 AIO F7 6S 40A BLHeli_32 4in1 ESC

MCU:	F745
Gyro:	MPU6000
Barometer:	BMP280
OSD:	+
CAM in:	+
Power :	2-6S
3.3V BEC:	0.5A
5V BEC:	2.0A
9V/10V BEC:	1.5A
PWM:	8
ESC type:	built in
ESC:	4x40A
BLHeli:	BLHeli32
Receiver:	-
VTX:	-
UART Rx:	7
UART Tx:	7
I²C:	+
Buzzer pad:	+
LED pad:	+
IR/INR pad:	+
Blackbox:	8Mb
USB:	Micro USB
Wifi:	-
Bluetooth:	-
Size:	33.5x33.5mm
Mount Holes:	25.5x26.5mm
Weight:	8.5g

FLYWOO new top GOKU series AIO are finally here! GOKU GNF745 40A FC is currently the highest level of all-in-one FC, which can meet all your FPV needs.

Use powerful F745 BGA chip and BLHELI_32 ESC firmware, integrate 5V/9V dual BEC, barometer, black box, WS2812LED, support 7 complete hardware serial ports, I2C and other functions are all open.
This is currently the most integrated and powerful FC AIO board on the market. It brings pilots a more stable and smoother flight.! Perfect for ultralight quad! It will be the most powerful FC AIO board in 2021.

Specification:

Item Name: GN745AIO BLHELI32 40A
MCU: STM32F745 32-bit processor,216MHz, 512Kbytes Flash
IMU: MPU6000 (SPI)
Barometer: BMP280
Onboard LED：WS2812*4
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
7 hardware UARTS (UART1,2,3,4,5,6,7)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onbord 8Mbytes for Blackbox logging
9V Power Out: 1.5A max
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 33.5x33.5mm
Mounting Holes: Standard 25.5/26.5mm square to center of holes
Weight: 8.5g

Built-in 40A BL_32 4in1 ESC
Support BLheli / BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
Input Voltage: 2-6S Lipo
Continuous Current: 40A
Firmware: BLHELI_32