Tinywhoops
Happymodel Moblite6 1S 65mm SPI FrSky
Multirotors → Tinywhoops → BNF/ARF/RTF Whoops → Happymodel Moblite6 1S 65mm SPI FrSkyBrand: Happymodel
Item Name: Moblite6 1S 65mm ultra light brushless whoop
Wheelbase: 65mm
Size: 80x80x25mm
Weight: 18.5g (without battery)
Weight: 26g (with Original 1S 300mAh Lipo battery )
Motor | Model: EX 0802 19000KV ( Unibell Version) Configuration: 9N12PStator Diameter: 8mm Stator Length: 2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Weight(g): 1.7g No.of Cells(Lipo): 1S only |
Flight Controller | (Frsky SPI RX Version) DiamondF4 FR FC Firmware Target: CrazybeeF4FR MCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000 (SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC |
Onboard 4in1 ESC | MCU Upgraded to EFM8BB21 Power Supply: 1S LiPo/LiPo HVCurrent: 5A continuous, peak 6A (3 seconds) Support BLHeliSuite programmable Factory Firmware: O_H_50_REV16_8.HEX Default Protocol: DSHOT600 |
Onboard Frsky SPI D8 receiver Version | SPI BUS Receiver Frsky D8 Compatible Compatible Non EU transmitter D8 modelChannels: 8CH Failsafe Support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m |
Onboard Flysky Receiver Version | SPI BUS Receiver Protocol: AFHDS and AFHDS-2A SwitchableChannels: 8CH (AFHDS) or 14CH (AFHDS-2A) Failsafe Support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Onboard 5.8G 40CH 25-200mW VTX | Output Power: 25mw~200mw switchable Frequency: 40CHInput Voltage: 3.3-5.5V Current Consumption: 300mA (type) Frequency: 5.8GHz 5bands 40 channels (include Race band) Smartaudio Ready |
Runcam Nano 3 FPV Camera | Model: RunCam Nano 3 Image Sensor: 1/3" CMOSHorizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
Lipo Battery | Capacity: 300mAh Quantity: 2 PCS |
Features:
- The lightest 1s 65mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- VTX power switchable 25mw~200mw
- Low profile Canopy design
Package Included:
1x Happymodel Moblite6 65mm Whoop RC FPV Racing Drone
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
4x EX0802 KV19000 Unibell Brushless Motor
1x Gemfan 1219 31mm Propeller (4cw+4ccw)
1x Runcam Nano 3 FPV Camera
1x Built-in 5.8Ghz 40CH 25mw-200mw VTX
2x 1S 300mAh Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver
1x Happymodel Carry Case
Prices for Happymodel Moblite6 1S 65mm SPI FrSky in stores
Deals found: 27 (AliExpress2, NewBeeDrone1, MakerFire1)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
NewBeeDrone | Stock level: 3 | $90 | 1 | $90 | ||
MakerFire | Out of stock | $100 | COUPON RCSEARCH | 1 | $93 | |
AliExpress | High stock level | $95 | 1 | $95 | ||
AliExpress | High stock level | $96 | + $108 | 1 | $204 |