Aomway Nexus V2 Full HD Digital Link

1080P 60FPS FHD Low to 30ms Lantency Support DVR HDMI Input
5.8GHz Transmission Up to 7km Distance

Description

Nexus V2 is equipped with high performance decoding chip and can do the most advanced low latency algorithm for HD video transmission. The whole system latency is estimated to be 30ms and reach up to 7km transmission distance, also adapt to multiple antennas for different application purposes. This digital link device enables real time aerial photography in full HD resolution.

5.8GHz high frequency comes with better anti-interference feature and guarantees high image quality. Dual signal output can do auto switch, one for 1080p micro HD camera and the other for HDin. It also has wide working voltage range 7-26V for different power supplies. The kit perfectly supports MAVLink protocol, can do overlapping display and set up for the OSD data at receiver, support both HD video recording in transmitter and receiver.

Features

Support FHD 1080P 60fps resolution

Support 5.8Ghz transmission

Support DVR HD recording in both transmitter and receiver

Support HDMI input

Support MAVLink protocol, OSD display.

Low to 30ms lantency

Up to 7km transmission distance

Specification

> Resolution: Full HD input:1080p 60fps(downward compatibility)/ Camera: 1080 25fps(downward compatibility)

> Auto switch frequency or manual frequency setup

> Minimum transmission latency down to 30ms

> HD camera with HD type C port, and HD type A port

> Transmitter antenna connector is MMCX, Receiver antenna connector is SMA-jack

> Fully support all MavLink protocol flight controller, and real time display OSD data on screen, such as flight controller parameters, frequency, bit stream, transmission RSSI and recording indicator etc.

> HD recording on both of transmitter and receiver side (MP4 format and every 3min to save a recording file)

> Advance algorithm for H.264 compressed format, 20Mbps bit stream and auto adjustment

> High frequency transmission at 5.8GHz for perfect image quality

> Use TF card for firmware upgrade (by manufacturer)

> Weight: Transmitter 60g; Receiver 108g (not include the antennas)

> Working environment: 0°C- 50°C

> Dimensions:Transmitter 32x62x24mm; Receiver 93x58x17mm

> Working voltage range:DC7-26V(2S-6S battery)

Package Included

1 x Nexus 2 HD link Transmitter

1 x Nexus 2 HD link Receiver

2 x MMCX Antenna