The iFlight Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter that comes with the RaceCam R1 FPV Camera and Nazgul 5" 3-blade propellers. This quad is the updated version of the XL5 V5 FPV frame.

The Nazgul5 V2 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! The Nazgul5 V2 is loaded with lots of power; it comes with the XING-E 2207 (6S 1800KV / 4S 2750KV) motors, SucceX-E F7 Flight Controller, SucceX Force 5.8g 800mW VTX Adjustable, SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, which makes this quad a must-have!

Note: The color of propellers may vary, the color strap may vary, GoPro and GoPro mount NOT included

Features

5mm arm design for more durability
Easy-Swap arm
LED illuminated Logo
XING-E 2207 motors and NAZGUL 5140 props
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks

Specifications

SucceX-E F7 45A flight stack
XING-E 2207 FPV Motor（6S 1800KV / 4S 2750KV)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)

Changelog

May 2021: SucceX-E F4 Stack changed to SucceX-E F7 Stack.
June 2021: Caddx Ratel camera changed to RaceCam R1 Mini camera.

FACTORY SETUP and WIRING DIAGRAM

This BNF comes pre-built and set up with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks to enhance the flight experience.

Reflashed your drone but didn't back up the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

FC // SucceX-E F7 Flight Controller

MCU: STM32F22RET6 216MHz
Gyro: MPU6000
Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
OSD: IFLIGHT OSD （AT7456E）
BEC: 5V 2.5A
BlackBox: 16MB
Uart: 4*UART(UART1、UART2、UART4、UART5)
UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry
UART2 for Receiver
UART4 for Free
UART5 for ESC Telemetry
4×Dshot/PWM outputs
Smartaudio & IRC Tramp VTX protocol supported
WS2812 led Strip: Yes
Bepper: Yes
Firmware: IFLIGHT_SUCCEX_E_F7
Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

Dimension: 40*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 14.4g
Supports 2-6S Lipo input
STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
Current sensor: YES
BEC: NO
Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

The output power is stable;
Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
Output 48 frequency points,
Frequency lock fast, the boot does not interfere with companions;
Built-in output power self-check function;
Full format video format: NTSC /PAL;
Wide input voltage range. low power consumption:
7V～36V，+12V/380mA@800mW;
-Small size:36*36*3mm
Mounting holes 4-M3
Lightweight: 7.2g(excluding antenna)

VTX Specifications

Item: SucceX-Force 800mW adjustable VTX
Input Voltage:
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW
Output 48 frequency points,
size:36*36*3mm
PIT/25mW/200mW/400mW/800mW