Zeez 45A 4in1 6S ESC

Multirotors → FPV Racing drones → ESCs → 4-in-1 ESCs → 45A 4in1 → Zeez 45A 4in1 6S ESC

Support up to 6S input (make sure to solder the aluminium low ESR capacitor in the holes in the battery pads) .

Build with STM32L4 MCU (80MHz frequency) , it support BlHeli32 firmware. It support new digital protocol (Dshot150/ Dhsot300 /Dshot600/ProShot 1000) and it’s still compatible with all older analog protocol (OneShot42, OneShot125, Multishot). It support also ESC telemetry and Bi-Directional DSHOT protocol for RPM filtering out of the box.

Double connection possibility: 8 pin JST SH 1.00mm connector or solder pad

Specification:

-Mounting Holes 20×20

-3S to 6S input

-Constant Current: 45A

-Peak Current: 55A

-STM32L4 MCU (ARM Cortex M4, 80MHz frequency)

-BlHeli32 Firmware (support Dshot150/ Dhsot300 /Dshot600/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)

-8 Pin JST connector and 8 Pin solder pads

-Holes for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)

-Onboard analog current sensor (Betaflight Scale: 200)

-ESC telemetry to read RPM and ESC temperature

-Compatible with Bidirectional Dshot out of the box

Zeez ESC 4in1 45A 2020 includes:

(1X) Zeez ESC 4in1 45A 2020

(4X) Aluminum Standoff

(1X) ESC to Flight Controller 8 Pin to Servo Connector JST SH 1.00mm connector

(2X) 470uF 35V Low ESR Capacitor

(1X) XT60 with 14AWG Silicon Cable for battery connection

(2X) Spare M3 rubber anti vibration for Flight Controller or ESC