Join to our channels: new products, coupons, best deals:
5" Drones with DJI Digital HD FPV System
iFlight TITAN XL5 HD GPS 6S DJI Air Unit PNP
FPV → HD Video Links → DJI FPV Digital HD → Drones with DJI Digital HD FPV System → 5" Drones with DJI Digital HD FPV System → iFlight TITAN XL5 HD GPS 4S DJI Air Unit PNP → iFlight TITAN XL5 HD GPS 6S DJI Air Unit PNPiFlight TITAN XL5 HD 250mm F7 50A ESC 6S FPV Racing Drone BNF with DJI Air Unit & GPS
Notice: The Camera Mount for Gopro is NOT Included in the pacakge.
Specification:
Brand Name: iFlight
Model: TITAN XL5 HD
Item Name: 250mm F7 6S FPV Racing Drone BNF
Wheelbase: 250mm
Optional Receiver: BNF-DJI ( Built-in DJI RX); Frsky XM+ Receiver ( Built-in DJI RX & Frsky XM+ RX)
Frsky R-XSR Receiver ( Built-in DJI RX & Frsky R-XSR RX)
TBS Crossfire Nano Receiver ( Built-in DJI RX & TBS Crossfire Nano RX)
Recommend Battery: 6S 1300mAh 120C Lipo Battery ( NOT Included)
Features:
Notice: The Camera Mount for Gopro is NOT Included in the pacakge.
Specification:
Brand Name: iFlight
Model: TITAN XL5 HD
Item Name: 250mm F7 6S FPV Racing Drone BNF
Wheelbase: 250mm
Optional Receiver: BNF-DJI ( Built-in DJI RX); Frsky XM+ Receiver ( Built-in DJI RX & Frsky XM+ RX)
Frsky R-XSR Receiver ( Built-in DJI RX & Frsky R-XSR RX)
TBS Crossfire Nano Receiver ( Built-in DJI RX & TBS Crossfire Nano RX)
Recommend Battery: 6S 1300mAh 120C Lipo Battery ( NOT Included)
TITAN XL5 250mm Frame | Wheelbase: 250mm Main body dimension: 185*133mm Bottom to top distance: 30mm Arm thickness: 6mm Bottom plate thickness: 2mm Top plate thickness: 2mm Camera plate thickness: 2mm (2.5mm included TPU inserts) Weight : 145g |
SucceX-D F7 Stack F7 V2.1 TwinG Flight Controller (HD Version) | MCU: 216MHz STM32F722 Gyroscope: 2x ICM20689 Baro: YES Blackbox: 32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale: 100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad : Yes RSSI input pad: No UARTs: 5 Motor outputs: 8 BLHeli32 Telemetry: RX5 Firmware: IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions: 36*36mm Weight: 7.5g USB type-C |
SucceX-D F7 Stack 50A 2-6S BLheli_32 4in1 ESC | Dimension: 43*39mm Mounting Holes: 30.5*30.5mm/Φ3mm Weight:14.4g Volts input: 2-6S STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware Current sensor: Yes Telemetry: Supported BEC: No Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc. Target: iFlight-BL32-4IN1 |
XING 2208 1800KV 6S Motor | Brand name: iFlight Item name: XING X2208 Brushless Motor KV: 1800KV Stator Diamter: 22mm Stator Length: 8mm Shaft Diameter: 5mm No.of Cells(Lipo): 3-6S Weight: 37g |
Nazgul 5140 3-Blade Propeller | Brand Name: iFlight Item Name: 5140 5 Inch Durable 3-Blades Propeller Model: Nazgul 5140 Material: polycarbonate Mounting: 5mm center hole Weight of Single Prop: 4g Quantity: 2 CW & 2 CCW |
Features:
- 6mm arm design for more durability
- XING 2208 motors for more power
- GPS pre-installed for more safety at distance
- Variable GoPro TPU mount (supports ND-Filter inserts)
- 360° TPU protection and Antenna mounts
Package Included:
Package Included:
- 1x TITAN XL5 HD Frame
- 1x DJI FPV Camera
- 1x DJI FPV Air Unit Module
- 2x DJI FPV Air Unit Antenna SMA
- 1x TPU Bracket for DJI Air Unit Module
- 1x TPU Antenna holder for DJI antenna
- 2x TPU camera side plate soft mount
- 1x TPU lens cover
- 1x iFlight Lipo Strap
- 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
- 4x XING 2208 1800KV Motor Unibell
- 1x SucceX-D F7 Flight Controller
- 1x SucceX BLHeli_32 50A 4in1 ESC
- 2x MMCX to RP-SMA Female Adapter Cable
- 1x GPS Module
- 1x Optional Receiver
- 1x Optional Receiver
Share
Prices for iFlight TITAN XL5 HD GPS 6S DJI Air Unit PNP in stores
Deals found: 24 (AliExpress2)
Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
AliExpress | High stock level | $467 | + $23 | 1 | $490 | |
AliExpress | High stock level | $609 | 1 | $609 |
See also
iFlight TITAN XL5 HD GPS 4S DJI Air Unit PNP
$539
iFlight TITAN XL5 HD parts