Join to our channels: new products, coupons, best deals:
Tinywhoops
HBFPV DC40 HD V1 85mm 4S 40mm Ducted Turtle
Multirotors → Tinywhoops → Cinewhoops → HBFPV DC40 HD V1 85mm 4S 40mm Ducted Turtle
HBFPV DC40 HD V1 85mm F4 OSD 3-4S 40mm Ducted FPV Racing Drone w/ Caddx Baby Turtle Camera
Specification:
Brand Name: HBFPV
Model: DC40 HD V1
Item Name: 85mm F4 OSD 3-4S 40mm Ducted FPV Racing Drone
Drone Wheelbase: 85mm
Package Included:
Specification:
Brand Name: HBFPV
Model: DC40 HD V1
Item Name: 85mm F4 OSD 3-4S 40mm Ducted FPV Racing Drone
Drone Wheelbase: 85mm
Carbon Fiber Plate: 1.5mm+1.5mm
Ducts: Nylon Plastic
Weight: 68g (without battery)
| AF412 Lite F4 Flight Controller AIO 12A ESC ( Diagram Picture) | Brand Name: HBFPV Model: AF412 Lite MCU: STM32F411 IMU: MPU6000 gyroscope/accelerometer (SPI) OSD: BetaFlight OSD w/ AT7456E chip Barometer: N/A BEC Output: 5V@2A Integrated LC Filter Include Buzzer pad Firmware target: MATEKF411 |
| ESC MCU: BB21F16G Continuous current: 12A(13A for 3 seconds) Input: 2-4S LiPo Supports Dshot600, Proshot, Oneshot125, Multishot Current meter: 210 Target: G_H_30 Size: 28.5×28.5mm board Installing Hole: 25.5×25.5mm, M2/M3 Weight: 4.7g | |
| D1103 7000KV Brushless Motor | Brand Name: HBFPV Model: D1103 KV: 7000KV(3-4S) Motor shaft diameter: 1.5mm Motor shaft length: 3mm Motor mounting hole: M1.6, hole distance 8.5mm Plug specifications: JST SH1.25 3-Pin plug Motor wire specification: 30AWG silicone wire, wire length 5cm Support voltage: 3.7-16.8v Support battery: 1-4s LiPo Product size: 13.6*13.6*15mm Product weight: 3.3g |
| Gemfan GF1635 3-Blade Propeller | Brand Name: Gemfan Model: GF1635 Item Name: 40mm 1.6 inch 3-Blade Propeller Color: Transparent Red Quantity: 2 CW & 2 CCW |
| 48CH 25/100/200/400mW VTX ( VTX Manual) | Brand Name: HBFPV Model: FDVTX Output Power: PIT-mode / 25mW / 100mW / 200mW / 400mW Switchable Control Mode: BF OSD Control (RX) / Button (IRC Tramp) Input Voltage: DC 5V Output Characteristic: PIT---------0dBm------70mA 25mW-----14dBm-----150mA 100mW----20dBm-----210mA 200mW----23dBm-----280mA 400mW----26dBm-----360mA Installing Hole: 16x16mm, M2 Size: 20x20mm Antenna: IPEX Weight: 1.5g |
| Caddx Baby Turtle FPV Camera | Brand name: Caddx Model: Baby Turtle Version: Whoop Version Image sensor: 1/2.7 inch -CMOS sensor Resolution: 800TVL Recording: 1080P/60fps, 1080P/30fps Lens: 1.8mm lens FPC FOV/Recording FOV: 170 TV system: NTSC/PAL changeable with OSD Video file format: MP4 Aspect ration: 16:9/4:3 Changeable with OSD Audio: Support Illumination: 0.01Lux DNR: 3DNR WDR: YES Fly OSD: YES Color: Black/White Power input: 5V-20V Power current: 12V/160MA Net weight: 9g Dimension: 14x14 & 19x19mm Dimension of mounting holes: 25x25mm (Whoop Version) |
| Optional Receiver | PNP ( Without Receiver) BNF ( With Optional Receiver ) Receiver Binding Manual |
| Lipo Battery ( NOT Included) | Recommend Battery: GNB 3S 450mAh / LDARC 4S 430mAh ( NOT Included) Estimated Flight Time: 4-7 minutes |
Package Included:
PNP (Without RX) Package Listing:
1x DC40 HD v1 Ducted Drone (Assembled & Tested)
1x Micro Screw Driver
1x Prop Remover
1x User Card
BNF (With RX) Package Listing:
1x DC40 HD v1 Ducted Drone (Assembled & Tested)
1x Receiver Pack
1x Micro Screw Driver
1x Prop Remover
1x User Card
See also
HBFPV DC40 HD V1 85mm Dusted 40mm
$26
Join to our channels: new products, coupons, best deals: