The LAL series comes with a new 5style fpv racing drone.
It means 5 Inch freestyle fpv racing drone reached a new level of cost-effective and appearance.
Made with more TPU protection parts , smooth power system and more different receiver version to convenient your selection. PNP and BNF version has ready and you will love flying it . Let's enjoy the 5style!

Note: TPU Camera mount for Gopro and Gopro7 camera show on the photo are not included. Camera mount will sale in spare part.

Specification:
Brand name: Eachine
Item name: LAL 5style 220mm 4S Freestyle 5 Inch FPV Racing Drone
Drone weight: 395.20g (Without Battery)

Frame Kit	Wheelbase: 225mm Bottom plate: 2mm Upper plate: 2mm Arm plate: 5mm X plate: 2mm
Motor	Mode: 2307 KV: 2450 Idle current (IO/10V): 2.1A No.of Cells(Lipo): 3-4S Peak current: 52A Max. power: 830W Max. thrust: 1337g (4S/5″) Configu-ration:12N14P Internal Resistance(Rm): 0.0386Ω Stator diameter: 23mm Stator thickness: 7mm Motor diameter: 28.5mm Motor length: 19.7mm Shaft length: 34.2mm Shaft diameter: φ5mm Motor mount hole size: M3 Install hole distance: 16*16mm Recommend propeller: 5-7 Inch Weight: 39.5g
ESC	50A 3-6S Blheli_32 DSHOT1200 4 IN 1 ESC Continue current: 50A Burst current: 60A (10s) Input voltage: 3-6S BEC: NO Current sensor: YES Main control chip: STM32F051 Firmware: Blheli_32 Support DSHOT 150/300/600/1200/MULTISHOT/PWM/ONESHOT MOS: 5X6 Installation hole: 30.5x30.5mm/φ3 Dimension: 49x37mm Weight: 13.5g
Flight Controller	LAL-F405 BT Flight Controller Main control chip: STM32F405 IMU: MPU6000 (By SPI) Input voltage: 2-6S Firmware: MATEKF405 Barometer: BMP280 Integrated OSD , support DMA mode (use F4 MCU control OSD) Support Betaflight configure BEC: 5V/2A ; 10V/2A Reserve MicroSD BlackBox 5 serial ports and I2C interface are reserved to facilitate GPS access (Bluetooth occupies TX5.RX5) Support receiver (PPM / DSM / IBUS / SBUS, SUMH, SUMD, SPEKTURM1024/2048, XBUS ) Supports programmable LED Sprit Supported firmware: betaflight / cleanflight / inav Reserved buzzer interface BAT and CRT, can monitor battery voltage and current (need additional current sensor) Install hole: 30.5x30.5mm Weight: 5.9g
Camera	Caddx Ratel 1200TVL Camera Brand Name: Caddx Item Name: Ratel Color: Red Lens: 2.1mm Image Sensor: 1/1.8" Inch starlight HDR sensor Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR Language: ENG/FRANCE/RUS/SPA/PU/KOREA/CHN/JAPAN Day/Night: Auto/Color/B&W/EXT Dimensions: 19mm19mm19mm Wide Power Input: DC 5-40V Work Temperature: -20℃~+60℃ Work Humidity: 20%~80% Weight: 8g (N.W.)/ 40.5g (G.W.)
VTX	TX805 /5.8G 40CH 25/200/600/800mw VTX Frequency: 5.8G Channels: 40CH Input voltage: 7V~24V 5V camera power: 120mA(MAX)----25mW@12V 5V camera power: 200mA(MAX)----200mW@12V 5V camera power: 300mA(MAX)----600mW@12V 5V camera power: 350mA(MAX)----800mW@12V Support TBS Smart Audio Power supply: 5V / 3A output for Camera Output power: 25mW/200mW/600/800mW switchable Antenna connector: MMCX Dimensions: 36X22X5mm 30.5hole Weight: 8g(Withour antenna)
Propeller	Racerstar 5046 3-blade Meterial: PC Blade: 3 Color: Transparent Center thickness: 7mm Propeller diameter: 127mm Weight: 5.1g/pc