HBFPV DX40 40mm EVA Ducted 3S HD PNP

HBFPV DX40 40mm EVA Ducted 2-3S HD FPV Racing Drone Caddx Baby Turtle F4 OSD 12A 0803 Motor

Specification:
Brand name: HBFPV
Item name: HBFPV DX40 40mm EVA Ducted 2-3S HD FPV Racing Drone Caddx Baby Turtle F4 OSD 12A 0803 Motor
Drone F4 OSD 12A 0803 Motor
Power Supply: 2-3S LiPo
Carbon Fiber Plate: 1.5mm+1.0mm
Ducts: Nylon Plastic
Wheelbase: 92mm
Weight: 65g (without battery)
Recommend BAT: GNB 2S 550mAh / GNB 3S 450mAh
Estimated Flight Time: 4-7 minutes
Receiver Options:
FrSky D8 / D16-EU-LBT / D16-NonEU, DSMX, FS-RX2A, for Futaba-SFHSS
Package Size: 132x132x33 mm
Package Total Weight: 166g

Flight Controller & ESC	Model: HBFPV AF412 MCU: STM32F411 IMU: MPU6000 gyroscope/accelerometer (SPI) OSD: BetaFlight OSD w/ AT7456E chip Barometer: N/A BEC Output: 5V@2A Integrated LC Filter Include Buzzer pad Firmware target: MATEKF411 ESC MCU: BB21F16G Continuous current: 12A(13A for 3 seconds) Input: 2-4S LiPo Supports Dshot600, Proshot, Oneshot125, Multishot Current meter: 210 ESC Target: G_H_30 Size: 28.5×28.5mm board Installing Hole: 25.5×25.5mm, M2 with damper/M3 Weight: 4.7g
Motor	Model: SE0803 KV: 12000KV(2-3S) Motor shaft diameter: 1.0mm Motor shaft length: 3mm Motor mounting hole: M1.4x3, hole distance 6.6mm Plug specifications: JST SH1.25 3-Pin plug Motor wire specification: 30AWG silicone wire, wire length 5cm Support battery: 2-3s LiPo Product weight: 2.45g
Propeller	Gemfan GF1635 3-Blade 40mm 1.6 inch Propeller Transparent Red Quantity: 2 CW & 2 CCW
VTX	Output Power: PIT-mode / 25mW / 100mW / 200mW / 400mW Switchable Control Mode: BF OSD Control (RX) / Button (IRC Tramp) Input Voltage: DC 5V Output Characteristic: PIT---------0dBm------70mA 25mW-----14dBm-----150mA 100mW----20dBm-----210mA 200mW----23dBm-----280mA 400mW----26dBm-----360mA Antenna: IPEX Weight: 1.2-1.5g
Camera	Brand name: Caddx Model: Baby Turtle Version: Whoop Version Image sensor: 1/2.7 inch -CMOS sensor Resolution: 800TVL Recording: 1080P/60fps, 1080P/30fps Lens: 1.8mm lens FPC FOV/Recording FOV: 170 TV system: NTSC/PAL changeable with OSD Video file format: MP4 Aspect ration: 16:9/4:3 Changeable with OSD Max Micro SD card supported: 64G Audio: Support Illumination: 0.01Lux DNR: 3DNR WDR: YES Fly OSD: YES Color: Black/White Power input: 5V-20V Power current: 12V/160MA Net weight: 9g Dimension: 14x14 & 19x19mm Dimension of mounting holes: 20x20mm (Normal Version)/ 25x25mm (Whoop Version)

User Guide
FC & ESC & VTX Manual: http://www.hbfpv.com/164/
IRC Tramp / Smart Audio OSD Manual: http://www.hbfpv.com/96/
Receiver Binding Manual: http://www.hbfpv.com/203/
Camera Manual: https://www.hbfpv.com/248/

Package Included:

PNP (Without RX) Package Listing:
1x DX40 v1 Ducted Drone (Assembled & Tested)
1x Micro Screw Driver
1x Prop Remover
1x User Card

BNF (With RX) Package Listing:
1x DX40 v1 Ducted Drone (Assembled & Tested)
1x Receiver Pack
1x Micro Screw Driver
1x Prop Remover
1x User Card