Multistar Elite 3510-350kv Carbon Case Multi-Rotor Motor

Description

The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance!

Multistar Elite motors are more than a fancy name. They are built using the highest quality components; from EZO Japan bearings, N45SH magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, precision windings, followed up with rigorous quality control. 

This Elite motor raises the bar further with a lightweight, low inertia carbon fiber motor can to maximize control response.
Keeping the motor windings cool is always a primary consideration in motor design and this too has been optimised for maximum efficiency.

The motor comes complete with a custom designed prop adapter, bolts and ready fitted 3.5mm bullet connectors to make installation a breeze.

Specs:
KV(RPM/V): 350KV
Lipo cells: 4~6S
Max current: 330W
Max Amps: 15A
No Load Current: 0.3A/10V
Internal Resistance: 0.16ohm 
Number of Poles: 12N/14P
Lamination thickness: 0.2mm
Magnets: N45SH
Balancing spec: 0.005g or better
Bolt hole spacing: 16 x 19mm/19 x 25mm
Motor Shaft: 4mm
Dimensions: 42 x 10mm
Weight: 121g