Jumper 218 Pro Racing Drone (ARF) (AU Warehouse)
Description
Jumper 218 Pro Racing Drone (ARF)
The Jumper 218 Pro quad copter is designed with the enthusiasts in mind. This quad has a wheelbase of 218mm The frame is lightweight, but very strong, allowing for high performance. Making it idea for FPV flight or 3D performing. Its simple installation quickly gets you operational and flying.
Naze32 flight controller with OSD gives fast reliable response. The bottom frame has power lines, AV transmitter interface, camera interface and power interface built in as well as the integrated power board (with XT60 connector). The arms have an intergraded power line for the ESCs to stop messy wiring. For FPV the kit comes with a 600 TVL camera, with adjustable mount, and 5.8mHz 200mW AV transmitter. The power train incudes 1806-2280KV motors with BlHeli 20AESCs and 5040 propellers to give you excellent performance. Built in LEDs on the arms show you the way to go.
This quad is great value for money and will give you hours of entertainment and enjoyment.
Features:
• Powerful 1806-2280KV motors
• BlHeli 20A ESC, quick response, smooth throttle
• 5040 Propellers (CW and CCW)
• Intergraded power distribution board and flight controller electronics (with XT60 connector)
• Naze32 flight control system with OSD, 32bit ARM micro processor for fast speed and fast response
• Flight controller Cleanflight and Baseflight supported
• Comes with bright LED lights to indicate the orientation of a multirotor
• Strong construction (1.8mm frame plates with multilayer construction, 3.2mm for arms)
Specs:
Wheelbase: 218mm
Flight Controller: Naze32 with OSD (baseflight, cleanflight)
ESC: BLHELI 20A
Brushless Motor: 1806-2280KV
Propellers: 5040 (2xCW and 2xCCW)
AV transmitter (TX): 5.8G / 200mW
Camera: CMOS 600 TVL, Visual angle 120 deg
Power Adapter: XT60
Dimensions: 216x190x44mm
Weight: 328g (with camera and AV transmitter without receiver and battery)
Included:
1 x Jumper 218 Pro
1 x Manual
Required:
1500-1600mAh 3S LiPoly battery
5-6 channel TX/RX
FPV Googles / screen
NOTE: There are known to be cheap cloanes of the Jumper 218 in the market. The fakes can be identified by the lake of the red trace wire (pictured above). The fakes may lose video signal when given throttle due to this issue. Hobbyking only sells the latest Jumper 218 Pro Genuine stock.
Price History
Combo items
The following items can be purchased with a combo-price, if you put them in the cart with Jumper 218 Pro Racing Drone (ARF) (AU Warehouse). Attention: these products may have more beneficial buddy-price or promo-price.SKU: ZC.1500.3S.25 | ZIPPY Compact 1500mAh 3S 25C Lipo Pack (AU Warehouse) 166 g |
SKU: 9171000702-0 | Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit) (AU Warehouse) 760 g |
SKU: 9114000020-0 | Turnigy TGY-i6 AFHDS Transmitter and 6CH Receiver (Mode 2) (AU Warehouse) 880 g |
SKU: 9171000444-0 | Quanum DIY FPV Goggle Set with Monitor (KIT) (AU Warehouse) 457 g |
SKU: 9114000007-0 | Turnigy TGY-i10 10ch 2.4GHz Digital Proportional RC System with Telemetry (Mode 2) (AU Warehouse) 1650 g |
SKU: T1500.3S.20 | Turnigy 1500mAh 3S 20C Lipo Pack (AU Warehouse) 148 g |
SKU: N1600.3S.25 | Turnigy nano-tech 1600mah 3S 25~50C Lipo Pack (AU Warehouse) 195 g |
SKU: 9210000076 | Turnigy nano-tech 1500mah 3S 25~50C Lipo Pack (AU Warehouse) 163 g |