Turnigy Accucel-8 150W 7A Balancer/Charger

Description

The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus it balances and discharges packs which is critical for keeping your expensive batteries in perfect condition.
This charger has a 12v input and can be used with a mains 12v power supply or your car battery when at the field.
TURNIGY Accucel chargers are built with quality components and produced in robotic pick-n-place SMT technology machines to produce a reliable and accurate charger.
You wont find a better priced quality 8 Cell charger!

The Accucell has various programming and charging modes and will accept and safely charge NiCd,Lilo, Lipo, LiFe, Pb batteries.

ATTENTION.
There are several chargers now entering the China market that look similar to the Accucel-8. These chargers are produced with cheaper FET's and are much less accurate and very unsafe. There have been reports of the copied chargers over-charging packs and not balancing correctly.
Our chargers have CE and RoHS certification, proving there safety. Plus, thousands of customers the world over have used our chargers with excellent success.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.

"CONNECTION BREAK" : This indicates you need to have the discharge AND balance plugs connected. This unit charges through the discharge wires and balances through the balance wires. Connect all wires or you will get a "CONNECTION BREAK" message.

Specs:
Operating voltage range: 11.0~18.0V
Circuit power: max: 150W
Charge current range: 0.1~7.0A
Discharge current range: 0.1~5.0A
NiCd/NiMH battery cell count: 1~27 cells
Lithium bettery cell count: 1~8 Series
Pb battery voltage: 2 to 36V
Weight: 625g
Dimensions: 170X125X35mm

This charger has a JST-XH charge plug, which makes it compatible with Zippy, TURNIGY and any pack with a JST adapter, balance ports are for 3s~8s packs only.

Note: Power supply not included.

"CONNECTION BREAK": This indicates you need to have the discharge AND balance plugs connected. This unit charges through the discharge wires and balances through the balance wires. Connect all wires or you will get a "CONNECTION BREAK" message.
Operating voltage range: 11.0~18.0Volt
Circuit power: max. 150W
Charge current range: 0.1~7.0A
Discharge current range: 0.1~5.0A
NiCd/NiMH battery cell count: 1~27 cells
Lithium bettery cell count: 1~8 Series
Pb battery voltage: 2 to 36V
Weight: 625g
Dimensions: 170X125X35mm