HobbyKing™ Typhoon 3D Balsa 1250mm (ARF) (US Warehouse)

Description

The HobbyKing Typhoon has been built exclusively for 3D. This balsa and plywood airfame arrives almost ready to fly with huge control surfaces and a light wing loading, the perfect recipe for some extreme aerobatics!

Upon opening the box you are greeted to a high level of fabrication. Just install hardware, electronics, and complete final assembly to be ready to fly. Experienced modelers can have the Typhoon ready to fly in an evening or two of work.

Control surfaces are hinged with CA style hinges. Wing mounted aileron servos and a tail mounted elevator servo keeps control rods short and precise, while the rudder servo is mounted up front with pull-pull cables running to the back, keeping extra weight out of the tail.

Aluminum landing gear and pre-painted fiberglass cowl and wheel pants round out the Typhoon's comprehensive package. Just supply your choice of motor, battery and electronics, a few building adhesives, and you're set.

The very attractive HobbyKing Typhoon 3D offers superb performance for both the 3D pilot and the sport flyer. This is the perfect all round model for the intermediate to experienced pilot as it looks good, flys great, is practical and doesn't cost the earth, you couldn't ask for more!

Features:
• Almost Ready to Fly  - Complete final assembly, and install your choice of battery and radio system
• Built up balsa and light plywood airframe
• 2 piece plug-in wings
• Highly visible color scheme with distinct top and bottom colors for easy orientation
• Oversize control surfaces for awesome 3D performance
• Pre-painted in fiberglass cowl and wheel pants
• Complete hardware pack including pull-pull cables for rudder

Specs:
Wingspan: 1250mm
Length: 1106mm
Weight: 1350g w/o battery
Wing Area: 29.13 dm2

Required:
4 Channel Transmitter and Receiver
Servos: 4x 12g digital metal gear
40A Brushless Speed Control
35mm Outrunner Motor (500-600 Watt)
3S 11.1V 2200~2600mAh LiPoly Battery