HobbyKing Super-H 600 QuadCopter (KIT) (EU Warehouse)
Description
Are you sick of aerial photography camera ships looking like a UFO’s and flying slow and smooth like you’re taking grandma for a walk around the block? HobbyKing comes to the rescue with the new Super-H 600.
The new Super-H 600 is a 600mm class sport flying H configuration quadcopter. The optimal layout allows for all your gear to be safely mounted between the frame plates and on the centerline for maximum maneuverability. The upper frame has provisions for 12 vibration isolation balls allowing for jello free FPV and HD video recording. The isolation benefit of a clean and dirty plate also lets you have tighter flight controller PID values for a nice tight wobble free multirotor. The proven and readily available arms make replacement in the event of a “daredevil move gone wrong” easy and cheap. The frame layout can handle a huge range of batteries and equipment and has provisions for camera and forward mounting gimbals.
If you’re ready for a fun and yet utilitarian quadcopter the Super-H 600 exceeds all expectations.
Features:
• Prop free view with H layout
• Built from quality glass fiber and polyamide nylon.
• Pre-threaded brass sleeves for all of the frame bolts.
• Colored arms for orientation to keep you flying in the right direction.
• Anodized aluminum hardware
• Hook and rod Mounting options
• Large mounting tabs on the main frame bottom plate for easy camera mounting.
• Easy assembly
• Provisions for a clean and dirty vibration isolation frame
Specs:
Motor to motor diagonal: 600mm
Weight: 599g
Motor mounting: 16~19mm
Frame plate length: 500mm
*Note: This frame has provisions for up to 12 vibration dampening ball for a clean and dirty system, the frame comes with aluminum standoffs standard. The vibration balls are sold separately and should be chosen depending on the given weight of the upper frame loaded.
Price History
Combo items
The following items can be purchased with a combo-price, if you put them in the cart with HobbyKing Super-H 600 QuadCopter (KIT) (EU Warehouse). Attention: these products may have more beneficial buddy-price or promo-price.SKU: 9171000331-0 | Piezo Buzzer for KK2 KK2.1 & Naze32 Flight Control Boards (1pc) (EU Warehouse) 12 g |
SKU: 9171000446-0 | Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA (EU Warehouse) 40 g |
SKU: 9392000010 | Turnigy Multistar 3525-850Kv 14Pole Multi-Rotor Outrunner (EU Warehouse) 190 g |
SKU: 9171000268 | HobbyKing KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer (EU Warehouse) 120 g |
SKU: 9171000033 | Hobby King Quadcopter Power Distribution Board (EU Warehouse) 38 g |
SKU: TR_P30A | TURNIGY Plush 30amp Speed Controller w/BEC (EU Warehouse) 55 g |
SKU: Turnigy-HKLP | Turnigy Battery Strap 330mm (EU Warehouse) 9 g |
SKU: 9192000117-0 | Turnigy Multistar 2814-700Kv 14Pole Multi-Rotor Outrunner (EU Warehouse) 180 g |
SKU: NTM2826S-1000 | NTM Prop Drive 28-26 1000KV / 235W (short shaft version) (EU Warehouse) 68 g |
SKU: NTM2830S-800 | NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) (EU Warehouse) 85 g |
SKU: TR_P25A | TURNIGY Plush 25amp Speed Controller w/BEC (EU Warehouse) 47 g |
SKU: Z50003S-30 | ZIPPY Flightmax 5000mAh 3S1P 30C (EU Warehouse) 490 g |
SKU: ZC.5000.4S.25 | ZIPPY Compact 5000mAh 4S 25C Lipo Pack (EU Warehouse) 535 g |
SKU: HKz30A | HobbyKing 30A BlueSeries Brushless Speed Controller (EU Warehouse) 47 g |
SKU: TAE-25A | Turnigy AE-25A Brushless ESC (EU Warehouse) 39 g |
SKU: TAE-30A | Turnigy AE-30A Brushless ESC (EU Warehouse) 39 g |
SKU: ORNG8F | OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver (EU Warehouse) 39 g |
SKU: TFR8S | OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver S-Spec (EU Warehouse) 39 g |