Afro ESC 12Amp OPTO UltraLite Multirotor ESC V3 (SimonK Firmware)
This is the OPTO version of the popular 12A V3 Afro, with most flight controllers and FPV gear being able to take higher direct voltage, such as the Naze32 with 16v input ability. The need for the BEC for some applications is not needed and OPTO isolation is a benefit.
Developed from the ground up, we wanted to build a truly Multi-rotor specific ESC that would offer the best performance and value in the market today. We wiped the slate clean and looked to the community for inspiration and help in designing an ESC that truly could be known as “The Multi-rotor ESC”
Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the Hobbyking in house engineering team gave us the edge needed to develop an ESC like no other and hence the Afro series was born.
Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. The Afro ESC series ship with multi-rotor specific SimonK software preloaded! No need to reflash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.
MikroKopter I2C compatibility has also been built in as standard. A DIY port is available under the shrink wrap which allows using the ESC with MikroKopter hardware that uses I2C control.
• Now Shipping with OneShot125.
Some stocks may require to flash ESC to OneShot125 via flash tool referenced in the related items
Current Draw: 12A Continuous
Voltage Range: 2-4s Lipoly
BEC: N/A OPTO
Input Freq: 1KHz
Discharge wire/plugs: 20AWG/Male 2mm
Motor wire/plugs: 20AWG/Female 2mm
Weight: 10g (Included wire, plug, heat shrink)
Size: 25 x 20 x 6mm
Royalties paid on each unit sold to SimonK and Hamasaki for their design work, without which the Afro ESC would never have been born, thanks guys!
Combo itemsThe following items can be purchased with a combo-price, if you put them in the cart with Afro ESC 12Amp OPTO UltraLite Multirotor ESC V3 (SimonK Firmware). Attention: these products may have more beneficial buddy-price or promo-price.
|Multistar Elite 2204-2300KV Multi-Rotor Motor 3-4S (CCW Prop Adapter)|
|Multistar Elite 2204-2300KV 3-4s 4 pack (2/CCW 2/CW)|
|XT30 Power Connectors for 30A Continuous Applications (5 Pairs)|
|Afro ESC USB Programming Tool|
|Multistar 2206-2150KV 3~4S 320w FPV Racing Motor "The Baby Beast"|
|DYS BE1806-2300kv Brushless Multirotor Motor 3S~4S|
|Multistar Elite 2204-2300KV Multi-Rotor Motor 3-4S (CW Prop Adapter)|
|Multistar Elite 2306-2150KV 'MINI MONSTER' Quad Racing Motor (Set Of 4 CW/CCW)|
|XT30 Power Connectors for 30A Continuous Applications (ESC Side) (5pcs)|