HobbyKing® ™ EZ Master Trainer EPO 1230mm (PNF) (AR Warehouse)

Description

Just another high wing trainer? We think not. The new HobbyKing® ™ EZ Master and Mini EZ Master are trainers at first glance, but once you fly them you'll see they're everything; trainer, sport plane, aerobat. Moulded of tough EPO foam, a bright graphical colour scheme makes them look good in the air, and durable when they inevitably hit the ground. Both the EZ Master and Mini EZ Master airframes feature tricycle undercarriage with a steerable nose wheel, bolt on wing, and full 4 channel control, including dual aileron servos for great roll response! Open the box and you are greeted with a low parts count, and minimal assembly. Go from the workbench to the flying field in less time than it takes to charge the batteries!

Take-offs are short and sweet due to the powerful brushless outrunner motor, with landings a breeze due to the light wing loading of both models. We have had a blast flying these planes during all of our testing and video shoots. They're stable when you want to relax, but push the throttle forward and slam the sticks into the corners and she wakes up. Inverted flight requires some down elevator due to the flat bottom airfoil, though the mild dihedral angle makes rolls as axial as one would expect from a high wing trainer. Kick in a little rudder at the top of hard climb outs and do crisp stall turns back to the downline.

Both the EZ Master and its little brother, the Mini EZ Master are available in two versions, Plug and Fly (PNF) and Almost Ready to Fly w/ Motor (ARF)

Features:
• Plug and Fly - Just install your choice of transmitter and micro receiver
• Moulded EPO airframe
• Easy access battery hatch
• Rugged aluminum main landing gear and spring steel steerable nose wheel
• Powerful brushless outrunner motor
• Vibrant, easy to orient pre-applied EZ Master graphics

Specs:
Wing Span: 1230mm
Length: 980mm
Flying weight: 920-1000g (with battery)
Motor: 2216 880KV Brushless Outrunner
ESC: 30 Amp Brushless
Propeller:  SF 10x7
Servos: 4 * 8g Servos


Requires:
4+ Channel Transmitter and Receiver
3S 11.1V 1800mAh LiPoly Battery