DeHavilland Vampire 90mm EDF Composite 1410mm (ARF) (UK Warehouse)
3496 g
Description
The de Havilland DH.100 Vampire was a British jet fighter commissioned by the Royal Air Force during the Second World War. Following the Gloster Meteor, it was the second jet fighter to enter service with the RAF. Although it arrived too late to see combat during the war, the Vampire served with front line RAF squadrons until 1953 and continued in use as a trainer until 1966. The Vampire also served with many air forces worldwide, setting aviation firsts and records. Almost 3,300 Vampires were built, a quarter of them under license in other countries. The Vampire design was also developed into the de Havilland Venom fighter-bomber as well as naval Sea Vampire variants.
Our DH Vampire comes almost ready to fly and is designed around a 90mm EDF unit powered by a 6~10S Lipoly battery. It is perfect for a pilot looking for something different. The model comes with fixed gear but is retract ready. The airframe of the Vampire is molded fiberglass composite for the fuselage/tailbooms with the wings and horizontal tail being of built up balsa and plywood. All wooden surfaces come pre-covered in plastic film.
Since this is a almost ready to fly model, all you need to do is complete the final assembly, install your components, and fly. All the difficult building and painting has been done for you. A few evenings of work is all that is needed to get the Vampire ready for its first sortie.
Features:
• Almost Ready to Fly - Just complete final assembly and install your own equipment
• Fiberglass composite molded fuselage
• Pre-covered balsa/plywood wings and horizontal tail
• Complete hardware package
• Fixed landing gear included, but retract ready
• Large fuselage top hatch for easy battery access
Specs:
Wingspan: 1410mm
Length: 1135mm
Flying Weight: 3600g
Requires:
7 Channel Transmitter and Receiver
90mm EDF with Motor
6S~10S 22.2~37V 4000~5000mAh Lipoly Battery 35C+
12 x metal gear 12g servos
100A High Voltage ESC (Depending on final setup)
Price History
Combo items
The following items can be purchased with a combo-price, if you put them in the cart with DeHavilland Vampire 90mm EDF Composite 1410mm (ARF) (UK Warehouse). Attention: these products may have more beneficial buddy-price or promo-price.SKU: TSB100A | Turnigy Super Brain 100A Brushless ESC (UK Warehouse) 149 g |
SKU: N5000.4S.35 | Turnigy nano-tech 5000mah 4S 35~70C Lipo Pack (UK Warehouse) 689 g |
SKU: 9020000002 | TURNIGY K-Force 120A-HV OPTO V2 5-12S Brushless ESC (UK Warehouse) 169 g |
SKU: 9261000006 | HobbyKing 100A ESC 4A UBEC (UK Warehouse) 123 g |
SKU: 9355000019 | HobbyKing YEP 120A HV (4~14S) Brushless Speed Controller (OPTO) (UK Warehouse) 237 g |
SKU: CS929MG | Corona 929MG Metal Gear Servo 2.2kg / 0.10sec / 12.5g (UK Warehouse) 33 g |
SKU: HK939MG | HobbyKing™ 939MG Servo MG 2.5kg / 0.14sec / 12.5g (UK Warehouse) 33 g |
SKU: MG90S | Turnigy™ MG90S DS/MG Servo 1.8kg / 0.10sec / 13.4g (UK Warehouse) 37 g |
SKU: TGY-375DMGplusHS | Turnigy™ TGY-375DMG w/ Heat Sink DS/MG 2.3kg / 0.11sec / 11.5g (UK Warehouse) 39 g |
SKU: ORNG8F | OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiver (UK Warehouse) 39 g |
SKU: N4500.4S.35 | Turnigy nano-tech 4500mah 4S 35~70C Lipo Pack (UK Warehouse) 627 g |
SKU: TGY_DEL100A | Turnigy dlux 100A SBEC Brushless Speed Controller w/Data Logging (UK Warehouse) 135 g |
SKU: TGY_DEL120HV | Turnigy dlux 120A HV Brushless Speed Controller (OPTO) (UK Warehouse) 165 g |