Futaba 14SG 14-Channel 2.4GHz Computer Radio System 2.4GHz FASSTest (Set) (Mode 2)

Description

Futaba has released the revolutionary 14SG Radio with the new 2.4GHz FASSTest technology allowing two way telemetry communication. The new protocol is also backwards compatible with FASST and S-FHSS making it the Go-To radio for virtually any 2.4GHz Futaba receiver. 

With the optional sensors the 14SG can transmit and receive telemetry and control data allowing you to monitor critical information live and set up different types of alerts. Heli pilots are going to love the new 3-Axis gyro support making this an unbeatable radio for flybarless helicopters.

The New case has an ergonomic feel with fatigue reducing rubber grips and wide switch spacing. The 14SG is also balanced perfectly off of the neck strap post, for a light hand grip and precision hand movements.

The Futaba 14SG has so many innovations and options from its easy to use user interface, SD card expansion to the headphone jack for audible alerts. You need to dive into the specs to grasp the full potential of the new 14SG.

Fetures:
• Channels: 12 proportional, 2 switched
• Compatible with FASSTest, FASST and S-FHSS protocols
• FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
• Free user-updatable software 
• 30-model memory 
• 10-character user naming
• 10-character model naming
• Airplane, helicopter and glider programming
• Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
• SensorTouch™ programming
• Compatible with secure digital memory cards for external storage of model setups and software • updates (32MB-2GB or HC (High-Capacity) 4GB-32GB)
• Left and right assignable slider switches
• Two assignable rotary knobs
• Six assignable three-position switches
• One assignable momentary two-position switch
• One assignable two-position switch
• Comfortable rubber grips on the sides and back 
• Wide top switch spacing
• Adjustable stick tension
• Dual ball bearing gimbals
• 4 vibration warning types 
• Home/Exit; User Menu/Servo Monitor buttons
• Audio earphone jack (for telemetry alarms)
• 6V 1800mAh NiMH battery pack
• User stick calibration
• Trainer system
• Servo speed adjust
• 5 programmable mixes 
• V-tail, Ailvator, winglet, motor mixing
• Trim mix
• Logic switch (condition switch only)
• Internal programmer for S.Bus servos
• User menu
• Servo monitor (neutral and moving tests)
• 2 count up/countdown timers
• Integral timer
• Model timer
• Quick model select

Airplane Features:
7 different wing types
3 different tail types
2 different rudder types
Flap setting menu
Differential ailerons
Aileron to camber flap mixing
Aileron to brake flap mixing
Aileron to rudder mixing
Rudder to aileron mixing
Rudder to elevator mixing
Camber mixing
Elevator to camber mixing
Camber flap to elevator mixing
Snap roll mixing
Airbrake mixing
V-Tail mixing
Ailvator
Winglet
Motor mixing
Fuel mixture mixing
Gyro mixing
Throttle curve (5-point)
Pitch curve (5-point)
Idle down

Helicopter Features:
6 swash plate types
Pitch/throttle curves (5-point)
Throttle hold
Swash mix
Throttle mix
Pitch to rudder mixing
Fuel mixture
Gyro (Flybarless support)
Governor (700-3500 rpm)
Hover pitch
Hover throttle
High/low pitch
Swash AFR
Swash setting (mixing rate, linkage compensation, speed compensation)
Swash ring (electronic)
Throttle cut

Glider Feature:
11 different wing types
3 different tail types
2 different rudder types
Flap setting menu
Differential ailerons
Aileron to camber flap mixing
Aileron to brake flap mixing
Aileron to rudder mixing
Rudder to aileron mixing
Rudder to elevator mixing
Camber mixing
Elevator to camber mixing
Camber flap to elevator mixing
Butterfly mixing
Butterfly to elevator mixing

Includes:
14SG transmitter (mode 2)
R7008SB 8ch FASSTest S.BUS2 HV receiver
Transmitter battery
Charger
Neck strap
Switch harness
Instruction manual