Quanum Pocket Vibration Telemetry Voltage Meter With Alarm (869.5Mhz FM)

Description

**SPECIAL PRICE** For a limited time only, this product is available for only US$19!

Introducing the Quanum Pocket Telemetry Voltage Meter, powered by proven ORX RF technology. A simple alternative to complex telemetry systems.

How many times have you forgotten to start your transmitter timer, or had to guess when to land, only to find out you still had a few minutes of fun left in your flight pack? The worst case scenario is the opposite, having low voltage cut off at the most inopportune times.

The solution to this problem is live telemetry feedback letting you know the status of your flight pack. This feedback allows maximum fun and minimizes risks. Up until now, live telemetry systems can be complex and expensive. The Quanum PVVM changes everything.

The Quanum Pocket Vibration Voltage Meter is a standalone system and consists of two simple parts; a pocket vibrating pager and a small transmitter that can plug into any Lipoly battery with a balance port up to 8 cells. The operation is simple, set the voltage you want to be notified at on the pager and slip it into your pocket. Then, plug the small transmitter into the balance port of your flight pack and you’re done. When your flight pack voltage drops to the preset voltage level, the pager will go off vibrating every few seconds, letting you know it’s time to end the fun. The transmitter can be moved from plane to plane not needing any integration into other systems, just the flight batteries balance port.

The Quanum Pocket Vibration Voltage Meter is a simple solution to a common problem, making telemetry plug & play simple.

Features:
• Lightweight
• Extremely simple to use
• Takes away the guessing of the status of your flight battery
• Makes flying safer

Specs:

Transmitter:
Size: 28x27x3mm
Weight: 4.3g
Voltage: 7~36V 2 to 8 cells Lipoly (via the balance port)
Frequency: 869.5Mhz FM
Signal distance: Around 300-400 meters

Pager/Receiver:
Size: 56x93x19mm
Weight: 41g (this is the part that goes in your pocket)
Batteries: 3 x AAA
Selectable voltage for notification: 3.3, 3.4, 3.5, 3.6, 3.7 volts per cell

Required:
Battery: 3 AAA Cell