fixfix
RCSearch
  • Submit registration
  • Login
Tell your friends about this site!
Publish on twitter.com
Recommend this site to Google users
На русском
Hobbyking
Join to our channels: new products, coupons, best deals:
RC FPV in winter
Multirotors
FPV
Helicopters
Remote Controllers
Airplanes, aircrafts, flying wings
Battery Chargers
Batteries
Robots
Electronics
Boats
RC Cars
Brands
Fasteners
Fun Club & Merch
DJI
Backpacks & Cases
Workbench
Arduino World

HobbyKing® ™ Bixler® ™ 2 EPO 1500mm Ready to Fly w/Optional Flaps - Mode 2 (RT

HobbyKing® ™ Bixler® ™ 2 EPO 1500mm Ready to Fly w/Optional Flaps - Mode 2 (RT
SKU: 9310000138-0

3207 g

Description

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 retains all of the great features of the original Bixler® ™ but offers more in terms of all round capability courtesy of larger dimensions and several design improvements.

This version of the Bixler® ™ 2 comes completely "Ready to Fly". A 6CH 2.4GHz radio system comes pre-installed and a 3S 2200mAh lipoly battery w/charger is included. You will simply need to finish the assembly while charging the battery, power up the model and fly. It's that easy!

The Bixler® ™ 2 has all the right ingredients, made from super tough EPO foam, everything is pre-installed so minimal assembly time is required, in fact, by the time you have charged a battery, it should be ready to fly! The combination of size, low wing loading and a sleek fuselage make for an excellent model with capable yet forgiving flight characteristics. The plug in wing makes the Bixler® ™ a practical model that is easy to transport to your favorite flying field and can be ready to fly in just minutes. Another practical feature of the Bixler® ™ 2 is its ability to accept a wide range of Lipoly sizes and/or FPV equipment courtesy of the enlarged canopy area. The Bixler® ™ 2 also comes with optional flaps which are pre-hinged (servos not included) the flaps are particularly ideal for FPV pilots carrying a heavier payload. The final improvement was to re-design the boom area to allow the Bixler® ™ 2 use a low kv motor and larger prop combo, which is more efficient and offers a more linear throttle response.

The larger wing, flaps & much larger canopy area mean that the Bixler® ™ 2 is now so much more versatile in terms of FPV use and for new pilots and experienced pilots alike who are simply flying for fun, these new design features, combined with the larger, more efficient prop mean that the Bixler® ™ 2 offers longer flight times. However you decide to fly the Bixler® ™ 2, you can be assured that it is still just as easy and fun to fly as ever!

Features:
• Completely "Ready to Fly" including the HK-T6A V2 2.4GHz 6CH radio system (Mode 2)
• Easy and Fun to Fly
• Easy, Fast and Simple Assembly
• New Larger Canopy area to accomodate FPV equipment and/or larger Flight Lipo
• Pre-Installed Servo's & Brushless Motor
• Larger Wing Span for greater glide & Payload Carrying Capability
• Plastic Landing Skid
• New, lower kv Brushless Motor/larger Prop Combo for Greater Efficiency
• Pre-Installed Optional Flaps Mounted on Plastic Hinges (require Servos for operation - not included)
• Plug In Wings for Easy Transportation
• Pre-Installed Round Pin Hinges on Rudder & Elevator

Includes:
HK-T6A V2 2.4GHz 6CH transmitter and receiver (Mode 2 transmitter - left stick throttle)
Turnigy 3S 2200mAh 20C lipoly battery
HobbyKing 2~3S lipoly DC balance charger
Instructions
Screwdriver
2 x Y-Lead
Hook & Loop Spare Clevis x 2
Horns & control Rods for Optional Flaps

Specs:
Material: EPO Foam
Wingspan: 1500mm
Length: 963mm
Flying Weight: 760g
ESC: 20A
Motor: 2620-1300kv Brushless Outrunner
Servo: 4 x 9g
Radio System: HK-T6A V2 2.4GHz transmitter and receiver (Mode 2 transmitter - left stick throttle)
Prop: 7x5

Required:
8 x AA battery for transmitter
2 x 9g servo for flaps (optional)
1 x Servo Reverser if using optional flaps


Combo items

The following items can be purchased with a combo-price, if you put them in the cart with HobbyKing® ™ Bixler® ™ 2 EPO 1500mm Ready to Fly w/Optional Flaps - Mode 2 (RT. Attention: these products may have more beneficial buddy-price or promo-price.
Turnigy 2200mAh 3S 25C Lipo Pack
SKU: T2200.3S.25
Turnigy 2200mAh 3S 25C Lipo Pack

240 g

HXT900 Micro Servo 1.6kg / 0.12sec / 9g
SKU: HXT900
HXT900 Micro Servo 1.6kg / 0.12sec / 9g

19 g

HobbyKing® ™ Bixler® ™ 2 EPO 1500mm Ready to Fly w/Optional Flaps - Mode 2 (RT
SKU: 9310000138-0
HobbyKing® ™ Bixler® ™ 2 EPO 1500mm Ready to Fly w/Optional Flaps - Mode 2 (RT

3207 g

Turnigy nano-tech 2200mah 3S 35~70C Lipo Pack
SKU: N2200.3S.35
Turnigy nano-tech 2200mah 3S 35~70C Lipo Pack

249 g

Turnigy 2200mAh 3S 20C Lipo Pack
SKU: T2200.3S.20
Turnigy 2200mAh 3S 20C Lipo Pack

248 g

HobbyKing™ HK15178 Analog Servo 1.4kg / 0.09sec / 10g
SKU: HK15178
HobbyKing™ HK15178 Analog Servo 1.4kg / 0.09sec / 10g

19 g

HobbyKing Bixler 2/Bix3 - Replacement Flap Hinges (6pcs/bag)
SKU: 310000070
HobbyKing Bixler 2/Bix3 - Replacement Flap Hinges (6pcs/bag)

15 g

Pin Horns L41xW12xH9.5 (Suit Bixler 2)(10sets)
SKU: 310000061
Pin Horns L41xW12xH9.5 (Suit Bixler 2)(10sets)

18 g

Turnigy Accucel-8 150W 7A Balancer/Charger
SKU: Accucel8150
Turnigy Accucel-8 150W 7A Balancer/Charger

990 g

Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack
SKU: N2200.3S.25
Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack

237 g

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set
SKU: 310000069
Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

35 g

Hobbyking Bixler 2 EPO 1500mm - Replacement Vertical Stabilizer
SKU: 310000066
Hobbyking Bixler 2 EPO 1500mm - Replacement Vertical Stabilizer

26 g

Join to our channels: new products, coupons, best deals:
Copyright © 2011—2025 | RCSearch.info | Manych project
↑