Phantom FPV Flying Wing EPO Airplane 1550mm (PNF) (EU Warehouse)

Description

The Phantom is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use.

The Phantom features tough EPO construction with molded in camera bays - one forward looking just under the nose and another mount in the top of the canopy with a plywood support pre-installed. Speaking of pre-installed items, the servos, 900kv outrunner motor and 30amp speed controller are also installed ready to go.

Assembly of the airframe is very simple, literally four glue joints required - foam glue is also included!

This model is capable of flights in excess of 30 minutes on a 3s 4500mAh lipo and the space under the canopy is cavernous! There is plenty of space for your choice FPV gear.

Features:
• Ultra tough EPO construction 
• Ultra stable flight performance
• Excellent FPV platform
• 30 minute plus flight duration on 4500mAh 3s lipo
• Easy to Hand Launch, Easy to Land 
• Stable Handling at Low and High Speeds 
 
Specs: 
Wingspan: 1550mm  
Length: 683mm 
Flying Weight: 900g 

Includes: 
Molded EPO foam parts
2 x 9g servos 
30amp Esc
900kv Brushless Outrunner Motor
2 x propellers (9 x 6)
Carbon Fiber Spars 
Hardware Set 
Decal Sheet 
Glue

Requires:
4 Channel Radio (with delta mixing)
4500mAh 3s Lipoly battery