fixfix
RCSearch
  • Submit registration
  • Login
Tell your friends about this site!
Publish on twitter.com
Recommend this site to Google users
На русском
Hobbyking
Join to our channels: new products, coupons, best deals:
RC FPV in winter
Multirotors
FPV
Helicopters
Remote Controllers
Airplanes, aircrafts, flying wings
Battery Chargers
Batteries
Robots
Electronics
Boats
RC Cars
Brands
Fasteners
Fun Club & Merch
DJI
Backpacks & Cases
Workbench
Arduino World

Turnigy CA80 160kv Brushless Outrunner (50~80cc Eq)

Turnigy CA80 160kv Brushless Outrunner (50~80cc Eq)
SKU: 8080-10-160

1920 g + 183 g = 2103 g [?]

Config Table


← Choose needed properties
for similar Motors search.
Kv  160 RPM/V
Weight  1545 g
Max Current  ?
Max Voltage  50 V
Power  ?
Internal resistance  11 mohm
Shaft (A)  8 mm
Length (B)  133 mm
Diameter (C)  81 mm
Can Length (D)  70 mm
Total Length (E)  152 mm

Description

Designed as a 50 to 80cc gas engine replacement, this motor is a direct bolt in for 17~30lb Sport, Scale and 3D planes .
A perfect size motor for 3D flight up to 20lbs.
The motor is very well built with strong mounts, end bell and a concentric double bearings at the rear to support large propellers and rotating can, especially during hard 3D flight.

This motor is very well engineered and of the highest quality.
The factory can produce only a limited number of these motors per month due to the increased time in balancing and machining such a large object.


Spec.
Model: 80-80-10
Resistance: 0.011ohm
ESC Required: 200A
Input Voltage : 30~50V
Kv : 160 rpm/V
Weight: 1545g
Shaft: 8mm
Non Load Current: 6.0A at 20V
Dimensions: 152x133x81mm (Including Mount)
Equivalent: 50-80cc Gas Engine


Model: 80-80-10
Resistance: 0.011ohm
ESC Required: 200A
Input Voltage: 30~50V
Kv: 160 rpm/V
Weight: 1545g
Shaft: 8mm
Non Load Current: 6.0A at 20V
Dimensions: 152x133x81mm (Including Mount)
Equivalent: 50-80cc Gas Engine
Join to our channels: new products, coupons, best deals:
Copyright © 2011—2025 | RCSearch.info | Manych project
↑