SCRATCH/DENT - Turnigy 1/16 4WD Nitro Buggy Engine (RTR) E1145 (UK Warehouse)
(2).jpg)
(1).180.jpg){kind=small}
(1).180.jpg){kind=small}
(1).180.jpg){kind=small}
(1).180.jpg){kind=small}
(1).180.jpg){kind=small}
(1).180.jpg){kind=small}
1586 g
Description
This amazing little nitro buggy was returned to us under warranty with a broken motor mount which has bnow been replaced, so that everything is just as it should be.
Grab a bargain with this high speed fun machine!
Don't let its small size fool you. This is a serious 1/16th Nitro Racer!
We've taken this great little nitro buggy and made it even better with an upgraded .07 engine! The Turnigy 1/16 4wd Nitro Racing Buggy now offers more power and a higher top speed, just what you need to satisfy your power hungry appetite!
Starting with a Japanese made pull start .07 ci nitro engine, tuned pipe, shaft driven four wheel drive - with steel shafts and disk brake, this little buggy ticks all the boxes. It has a great range of adjustability out of the box, such as: adjustable upper control arms, shock absorber fulcrum, shock absorber pre-load, rear suspension roll center and adjustable down stops.
A quick look over the images will demonstrate the inbuilt durability and over-engineered components such as the suspension arms, shock mounts and bulkheads. It's built more like a 1/10 scale racer than a 1/16th!
This car arrives ready to run, completely built with the high torque steering servo, throttle servo and all linkages pre-installed/adjusted. The included Quanum 2.4GHz 3Ch radio system is pre-installed as well. Just add 8 AAA batteries, fuel, a glow plug driver and your ready to rock!
Specs:
Servos: 15g high torque micro
Drive: Full time 4WD, twin differential
Width: 187mm
Height: 101mm
Track: 191mm
Length: 280mm
Wheelbase: 177mm
Gear ratio: 11.2:1
Engine: .07 ci
Ground clearance (F/R): 20~30mm
Required:
8 x AAA batteries (4 for receiver and 4 for transmitter)
Nitro fuel
Glow plug driver
Warranty:
No warranty available for this item.
Item used as a display item only.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.
Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.
Item will be deactivated once a 0 stock level is reached.
For full details please see PRODUCT ID: 9249000748-0