Walkera Rodeo 150 Mini FPV Racing Drone (B&F) (Black)

Description

Walkera Rodeo 150 Mini FPV Racing Drone FCC (B&F) (Black) w/camera/VTX/Universal Charger

Yeeha here comes the Rodeo. The Rodeo 150 is an exciting new FPV racing drone from Walkera. Its small size and stylized symmetrical modular design makes it not only visually impressive but it will cut through the air.

The outer casing not only looks good but keeps all the electronics out of harms way as well as stopping electronic interference. The Walkera Rodeo is built for racing, both indoor and outdoor. Matched with the included 600TVL, 110 deg wide angle, mini camera up front for day flying and also extremely good in low light conditions. A big LED light up front shows you the way while there are circular red LEDs on the side so people can see where you’re going.

The F3 flight controller is easily updated and can be configured to suit your flying style through Cleanflight. The professional 5.8GHz video transmitter is built for racing drones with zero delay and 40 available video channels (race band inc.). Just a flick of a switch will change the 3 preset flight modes to suit your flying level Stabilized, Intermediate and Advanced (for 3D flying).

It’s time to get the Rodeo before this racing drone gallops out the door.

Features:
• 600TVL low light FPV Camera
• F3 flight controller
• Streamlined design
• 5.8GHz HD video transmitter, 40 ch (raceband)
• 3 flight modes (stabilized, intermediate, advanced)
• Small frame

Specs:
Main Rotor Dia: 96mm (3.5”)
Overall (L x W x H): 137 x 148 x 77mm
Weight: 159g (Battery excluded)
Receiver: DEVO-RX716
Main Controller: FCS-Rodeo 150
Video Transmitter: TX5832(FCC)
Brushless Motor: WK-WS-17-002(CW/CCW)
Brushless ESC: Rodeo 150
Battery: 7.4V 850mAh 30C 2S LiPoly
2D Flight Time: 7~8mins
Working environment: -10C~ +40C

Camera Specs:
Horizontal Resolution: 600TVL
FOV: 110 deg
System Committee: PAL/NTSC
Video Out: 1.0Vp-p/75Ω
Power Input: DC 5-12V

Video Transmitter Specs:
TX5832(FCC) transmitter
5.8GHz wireless image transmission
TX5832(FCC) Bind B section: 4 channels (US)
TX5832(FCC) output power: 100mW (US)

Includes:
1 x Walkera Rodeo 150
4 x Self-Tightening Propellers
1 x GA005 Balance Charger
1 x Transformer (Universal Plugs)
1 x Battery (7.4V 850mAh)
1 x USB cable

Requires:
Flight Controller
FPV Googles or Monitor