Grove Starter Kit Plus Internet of Things (IoT) Edition

Description

This Grove starter kit plus has been designed to make creating applications intuitive and as simple as possible.

When used with the included Base Shield V2 as the Arduino breakout board, the kit allows you to plug in the different sensors and actuators to build a wide range of projects and systems customized to your own needs.

Regularly updated demo codes are provided on the Grove website (http://www.seeed.cc/projects.html?t=Grove) for proven projects from a simple thermometer to GPS tracker systems. Adding additional sensors expand the possibilities even further. The site also has a tutorial section covering all aspects of the Grove kit.

A brilliant and practical introduction to the fascinating world of robotics and coding, perfect for inquiring minds!

Features:
• Easy to understand kit
• Arduino compatible
• Online community support
• 7 Sensors
• 3 Actuators
• Stepper motor

Specs:
Base Shield:
Operating voltage: 3.5~5.5V
Dimensions: 55 x 70mm

Sound sensor:
Voltage: 4~12V
Operating current (Vcc = 5V): 4~8mA
Voltage Gain (VS=6V, f=1 kHz): 26dB
Microphone sensitivity (1Khz): 52~48dB
Microphone Impedance: 2.2KΩ
Microphone Frequency: 16~20Khz
Microphone S/N ratio: 54dB
Dimensions: 20 x 20mm

Rotary Encoder:
Voltage: 4.5V~5.5V
Current: 10mA~30mA
Dimensions: 20 x 20mm
Weight: 12g

Piezo Buzzer:
Voltage: 4~8V
Sound Output: ≥85dB
Frequency: 2300Hz +/- 300Hz

3-Axis accelerometer:
Voltage: 3.3~5V
Test Range: +/-16g
Operating current: 0.1 μA in standby mode at VS=2.5V

Light sensor:
Voltage: 3.3~5V
Resolution: 16-Bit @ 400 kHz I2C Fast-Mode
Dynamic range: 0.1 - 40,000 LUX

Temperature sensor:
Voltage: 3.3~5V
Resistance: 100 KΩ +/-1%
Thermistor: NCP18WF104F03RC (NTC)
Nominal B-Constant: 4250 ~ 4299K
Operating range: -40°C ~ 125°C +/-1.5°C

Stepper motor/driver:
Voltage: 5V
Poles: 4
Speed ratio: 1/64
Stride angle: 5.625°/64
Resistance: 200Ω +/- 7% (25°C)
Idle in-traction frequency: >600Hz
Idle out-traction frequency: >1000Hz
Resistance: >10MΩ (500V)
Noise:

Included:
Base Shield V2
Momentary button
Piezo buzzer
Stepper motor
Backlit LCD display
Light sensor
Vibration sensor
Audio sensor
Touch sensor
Rotary angle sensor
3-Axis digital accelerometer (+/-16g)
Temperature sensor
LED set